Jump to content
SAU Community

Shipping From Japan Back To Aus

michaelz

By michaelz,
in Japan

 Share

Recommended Posts

michaelz Contributor

michaelz

Posted
Posted

I got a set of wheels I want to send back to Aus. How do people usually send big items back?

I could send it via EMS. There's a limit of 30 KG and if I take the tyres off them they're easily under that. Then there's the issue of maximum volume allowed for the box which is also a pain.

Is there a easier method to send them home? If anyone knows please help me out.

Cheers,

Mike

Link to comment
https://www.sau.com.au/forums/topic/369295-shipping-from-japan-back-to-aus/
Share on other sites
Luke_ENR34 Grand Master

Luke_ENR34

Posted
Posted

U can sea post wheels. I sent a set of TE37 18x10.5 back but had to take them out of original boxes and make the packing round to fit under the posting guidelines.

Btw tyres will need to either be sent seperate or taken off before shipping as they are to big.

elrodeo666 Mentor

elrodeo666

Posted
Posted

Depending on their size send them Sea Post but you will be limited to size as all cubic dimensions must be no more than 200cm's max thus you will have to do what Luke said and repack around so they can go.

Dont worry if you get knocked back just try another post office. Just make sure they go as 4 separate parcel and make sure you packed em properly..a square rim box will not go.

Also dont send them the same day if they are going to be worth over $1,000 as you may get stung import duties. Customs are not dumb, so sending 4 brand spankers and under quoting them could see you forking out some duties.They are still blitzing on this at the moment. Just send 2 one day and another 2 the next.

Also its worth throwing on insurance..its about 6-800yen extra to insure for 80,000yen.

If you have any questions flick me a pm or if you can wait 2 weeks you can call my ketai. I'm out of Jappa for 2 weeks sorting some stuff out in Korea just pm me for number.

Heres some info from Japan Post site

http://www.post.japanpost.jp/int/use/parcel_en.html

adam87 Community Regular

adam87

Posted
Posted

i havent been able to send anything bigger than about a 17x9.5 through sea or SAL recently. theyve been going nuts!

another option is to send it with kuroneko yamato. pack two wheels together and it fits in the biggest size. will set you back about 53000yen i think from memory.

Luke_ENR34 Grand Master

Luke_ENR34

Posted
Posted

What Mark said about sending 2 one day and 2 another. You may want to send to seperate address as the ship ships every 3weeks I'm sure so sending 2 one day and 2another you will still be stung for tax, EMS is ok for doing that tho.

elrodeo666 Mentor

elrodeo666

Posted
Posted

What Mark said about sending 2 one day and 2 another. You may want to send to seperate address as the ship ships every 3weeks I'm sure so sending 2 one day and 2another you will still be stung for tax, EMS is ok for doing that tho.

Not always as Sea Post gets sent to Kawasaki depot and will depend on when it gets sorted which ship it leaves on.

But yeah way better for different addresses or send a few weeks apart.

The other thing to look at when devaluing is parts to avoid customs duties is you will only be ably to insure to the devalued amount and if it goes missing in transit then the insured devalued amount is all you will recoup.

Saying that Japan post is extremely reliable and efficient it seems when it gets to Aussie Post that the wheels seem to fall off the cart.

End of the day if your buying through the right people in Japan you should be getting your parts at a cheap price including import tax & gst.

  • 2 weeks later...
  • 4 months later...
  • 1 month later...
elrodeo666 Mentor

elrodeo666

Posted
Posted

"fun-in-a-bin" I think he's having you on mate lol

No not having him on..

Chuck the kanji 船便 into a translator and you'll see the meaning for funabin means shipping service.

  • 1 month later...
OMG513 Collaborator

OMG513

Posted
Posted

hey guys i'll be in japa on march 14th and was planning to buy alot of parts, especially wheels. Would it make more sense in this case to post it via container (shared)? or else what would be the most economical way? Thanks

Cheers,

Kev

  • 1 month later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...