Jump to content
SAU Community

Recommended Posts

ive decided to sell my GTR and everything that goes with it after being so close to completion im just over it and have other priorities right now.

OS GIKEN RB30 SHORT BLOCK $17k BRAND NEW NEVER USED

full motec m800 setup with motec SLD dash, SLN, CDI ignition, everything imaginable 17k (cost 25)

full race spec jun head NEW NEVER USED, 11k (cost 13)

hypertune intake w/90mm plenum and billet fuel rail with water breather setup NEAR NEW 4k

greddy radiator NEAR NEW 500

greddy 150mm intercooler NEAR NEW 1500

1200hp triple pump surge fuel setup and all lines USED FOR 1 START UP 5k

trust single hi mount manifold and wastegate AS NEW used for under 1000km 2k

19x10 racing hart rs721 with hankook 265/30/19s 95% tread 3k

everything is sitting at a workshop in sydney and can be inspected upon prior arrangement with myself and i will arrange it with the shop (apart from the car and m

also selling the r32 gtr as a rolling shell for anyone who may be interested $12k ready to drop an engine and loom into

- custom dark green, has all glass/panels/lights intact and good condition and complied

- tein super streets

-kts hicas lock and front upper arms and traction rods

- cusco castor rods and rear camber arms

- all brand new whiteline bushes and swaybars were fitted

- r33 gtr brembos with new DBA rotors and FERODO DS2500 pads

these were all fitted a few years ago, but the car has been off the road and when it was on the road, i had only done a few thousand km MAX highway and some street driving.

ill start gathering the pics tonight and over the weekend but if your keen most of it speaks for itself msg me and well go from there.

everything is located in sydney

thanks!!

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

pms replied, had a few pms about the head for specs, its a stage 2R head 280deg cams high lift double springs, retainers, nitto guides and valves and everything is brand new, the head was brought brand new from nissan and its assembled ready to go!!

thanks

pic of car and wheels

gtr2.jpg

pic of engine bay where the intake side can be seen and the radiator,

32.jpg

fuel setup in boot, there is also a fuel filter and the lines that run under the car all the way to the front to be included.

IMG_1475.jpg

ll be going to the workshop tomoro to take pics of the head and as much as i possibly can!!

Edited by SRB

pic of car and wheels

gtr2.jpg

pic of engine bay where the intake side can be seen and the radiator,

32.jpg

fuel setup in boot, there is also a fuel filter and the lines that run under the car all the way to the front to be included.

IMG_1475.jpg

ll be going to the workshop tomoro to take pics of the head and as much as i possibly can!!

I know how you feel big fella. I am almost at the same point as you, seems all I am doing is emptying my pockets and going nowhere. PM sent anyway!

some pics of the head, - the cams and springs have not been installed yet, although they will be for the prospective owner.

jun stage 2r hi lift cam kit

nitto guides and valves

race porting and all new stems, collets etc etc

the MOTEC stuff consists of

- M800 ECU WITH ADVANCED FUNCTIONS

- SDL BACKLIT DASH AND CONNECTOR

- SDL 8MB LOGGING

- SKM KNOCK SENSOR

- SKM KNOCK SENSOR LOOM

- SINGLE WIDEBAND LAMBDA UPGRADE

- SLM SHIFT LIGHT MODULE

- CDI 8 IGNITION SETUP

- FULL CUSTOM HARNESS AND RE WIRE TO SUIT R32 GTR

IMG_1424.jpg

IMG_3546.jpg

IMG_1488.jpg

IMG_8588.jpg

Edited by SRB

motec sdl and logging SOLD all the other stuff still remains..

alot of interest in the head, block and intake and intercooler but nothing 100% yet...

throw me an offer u never know :thanks:

now seperating motec if need be

m800 ecu and loom w/ wideband lambda and advanced functions - $10k (wiring alone cost $8500 full mil-spec)

knock sensor and loom $1500

cdi 8 ignition $1700

these have literally been used for one dyno run

or 12k everything.

would you seperate the coolant breather tank? im assuming its hypertune as well?

hey no sorry its going with the plenum, and yes its from hypertune

intercooler n radiator is to fit which car?

r32 GTR

hypertune intake w/breather setup. intercooler with pining SOLD pending $.

ive decided to keep my motec loom for a rainy day.

the racing radiator is all alloy, 2 core, wide tube and 48mm thick

motec m800 with advanced functions - $3500

motec skm knock sensor and loom $1600

motec cdi 8 ignition $1800

Edited by SRB

Got pics of the motec stuff expecially the loom? Just wanna see how it was made up etc!

its coming out next week ill get some then

got gtr cank and rods

sure do 17k read the first post :)

MOTEC M800 AND SKM SOLD

INTAKE AND INTERCOOLER SOLD

WHEELS SOLD

MANIFOLD AND GATE SOLD

HEAD MAYBE SOLD.... WILL KNOW THURSDAY

OS GIKEN RB30 SHORT BLOCK BRAND NEW NEVER USED PRICE DROP 16K

1200hp triple pump surge fuel setup and all lines USED FOR 1 START UP 4k PRICE DROP

MOTEC ENGINE HARNESS AND CDI-8 8K

Edited by SRB

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey everyone. Is there a way I can get the original window sticker (maroney label) for my 1995 R33 GTST? I doubt I’ll be able to ever get it but it’s worth a shot to ask
    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
×
×
  • Create New...