Jump to content
SAU Community

Nismo 300km/h instrument cluster ***SOLD***

gmc
 Share

Recommended Posts

  • 2 weeks later...
dAVE Grand Master

dAVE

Posted
Posted
How do you explain to RTA about the speedo readings being different out of curiosity??

If you want to find more info out, search the forums, dont chat in here. Im sure the RTA has no problem with your speedo showing 300 instead of 180... As you will notice most australian cars show over 180 on their speedo.

stav Mentor

stav

Posted
Posted
Nismo R33 GTR 320km/h white faced cluster with 39,852kms. It's still in the original box, $700ono.

I'm in Sydney, but will ship anywhere if purchaser pays for postage.

Please sms(preferable) or email me your number as I will be in Sydney later this week and I can pick up the dash. Ph. 0419277774 email [email protected]

Thanks,

John

  • 3 weeks later...
XEQTOR Community Regular

XEQTOR

Posted
Posted
If you want to find more info out, search the forums, dont chat in here. Im sure the RTA has no problem with your speedo showing 300 instead of 180... As you will notice most australian cars show over 180 on their speedo.

Dave: FYI I was enquiring about the problems possibly to be encountered at the RTA NSW with ODOMETER readings being different, also I was asking the OWNER as he/she has the unit and may know this information possibly off hand. As I was a genuinly interested purchaser of this particular unit at the time I feel I was entitled to ask such a question, not only for myself, but other probable buyers.

To be publicly told "dont chat in here" annoyed me because of the above mentioned. As a moderater I think you need to review your tact!

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • GTSBoy
      R32 GTS (RB20DE) Injectors Replacement

      By GTSBoy · Posted

      No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • codygrimm27
      Can you mount the ATTESA pump in other locations?

      By codygrimm27 · Posted

      Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...