Jump to content
SAU Community

Wanted To Borrow: Standard Suspension C34S2 Rs4S

Marshstag
 Share

Recommended Posts

Marshstag Collaborator

Marshstag

Posted
Posted

Hey guys,

I'm wondering if anyone has a stock suspension setup for a C34s2 RS4S that I could borrow?

I'm trying to get my Stagea through an inspection so that I can register it in SA!

Any assistance would be greatly appreciated.

Thanks

  • 2 weeks later...
pork hunt drifting Rising Star

pork hunt drifting

Posted
Posted

thats bull shit mine went through with tein coilovers and the front almost sits in the guards u got unlucky. sorry to hear u got to go through the hassle of changing ya setup.

Marshstag Collaborator

Marshstag

Posted
  • Author
Posted

Yep it is complete bullshit. I went back for the roadworthy inspection and got completely raped at Regency. They pinged me for a non existant turbo timer, factory and complianced xenons, a leak in one of the rear shocks that I borrowed and some other stuff :(

Any help would be greatly appreciated!

Fgjoh Collaborator

Fgjoh

Posted
Posted (edited)

geez mate you seem to have no luck or you just got an ass of an inspector, i would say the latter would be correct.

i got through fine with those shocks. sorry to hear your lucking out at the moment. do you have the compliance paperwork, if the car is in the condition as listed as on the paperwork it should breeze through

although it did take roughly a month and a half to get mine done and the guys at vehicle standards began to recognise me

on a side note speak to jason at vehicle standards he might be able to point you in the right direction on how to get the car through

Edited by Fgjoh

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Yeetus
      98 R34GTT 4k engine stumble

      By Yeetus · Posted

      Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • GTSBoy
      98 R34GTT 4k engine stumble

      By GTSBoy · Posted

      Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
×
×
  • Create New...