Hans On Exhaust

[Danzil]

Hey all

I'm now in the process of getting an exhaust for my car and i've found a descent place.

3' inch mild steel, hi flow cat, turbo back and stainless steel tip = $800 (fitted)

Seems like a good price as other places quoted me 1500 for the same job.

What you guys think? Any good?

-Dan

[Danzil]

Dope! ...and the place is ... HANS ON EXHAUST in Maddington.

-Dan

[MirKz]

is it mandrel bent ?

the mandrels will give ya better airflow, which means better performance!

[red17]

In all honesty the difference between mandrel and press bent exhausts isnt huge especially when theres not many bends involved.

My R32 has 3 bends (that are of any significance, and one of those is on the front pipe which he isnt getting anyway), the rest are such slight bends (5-10 degrees) that spending extra money on a mandrel bend is a bit silly.

Admitedly I have seen some bad press bent exhausts that would limit flow considerably. But done correctly they can be pretty good. And since 3 inches is pretty large anyway, going down to 2.5-2.75" on 2 or 3 bends isnt going to stifle flow that much.

[driftaR32]

hey danzil, thats my uncles shop

[driftaR32]

uhhh sorry, this is megz, i have no idea how im logged into ur account driftar32 sorry guys.

[gtracer]

Hans does great work. He did an exhaust on my friends Lancia Beta and did a really good job. Highly recommended.

[ix9]

OMG. You said Turbo-back for $800 ?

So that's Dump, Front Pipe, High Flow Cat, and Cat back system.... all for $800...

Are you sure? Cos that's a dam good price!

[LazyZed]

Hey all  

I'm now in the process of getting an exhaust for my car and i've found a descent place.

3' inch mild steel, hi flow cat, turbo back and stainless steel tip = $800 (fitted)

Seems like a good price as other places quoted me 1500 for the same job.

What you guys think? Any good?

-Dan

That's a very good price!

I've been looking in the region of 1500 bucks minimum for my exhaust (mind you, it is twin system being a 300zx).

Might have to have a talk to the fellows there and see what they can do for me

Cheers

Rob

[GWP021]

hell mine cost $1500 turbo back but i had the dump custom made cause all the A/M ones i lookd at blocked tha wastegate same as the origi cast piece but hey less one one part more for others

[Danzil]

Sounds good. From what i hear

Hey Drifta32(megz) since its ur uncle maybe he can get me mates rates

Just kiddin mate...but since he ur uncle did he do ur exhaust too? For the 800 will it be a descent 3inch..as Red17 said MAndrel bends do cost more..and i don't want to go over 800.

Thanks guys

-Dan

[stevee]

Hi All i went out yesterday to visit this exhaust shop and yes its $800.00 fully fitted 3" all the way from the turbo with a dam big cannon on the back end the only problem is he said it would take 1 - 1 and a half days to do the job nice bloke,

He said that he has done a few WRX and sorts he also said that its quiet loud but can supply a baffel that you can screw into the back of the exhaust to make it a bit more quiet. well worth a look if you are able to be with out you car for a day or so.

[RB20LagWagon]

remember its only mild steel which is why it is 800, full stainless would be more expensive, mild steel isnt anywhere near as expensive as the shiny stuff especially for bends