Jump to content
SAU Community

Recommended Posts

hey all, dont know if you guys have ever had this problem, i cant hit rev limiter, i can hit 5500rpm and then the car just dies, throttle wide open, boost drops to 0 and car stops driving but still keeps revs to 5500rpm, the engine just stops pushing........no boost no pull no nothing, just stays there, with foot to the floor.

cant for the life of me figure out what it is.

but sometimes it does go away, but instead, at 5500rpm it cuts out for 2 seconds and then just keeps going as if nothing happened..

any helpful info would be great.

RB25 neo motor, no TCS in the car all stock besides exhaust and coilpacks.

Link to comment
https://www.sau.com.au/forums/topic/372403-problem-with-rb25-neo/
Share on other sites

yeah i got stock ecu too wit mild mods and my ecu

freaks out when i try tap into the boost i even tryed resettin it

but when i put a nistune in it runs sick

^^ or ya spark is breakin down coilpacks plugs

but generally when that happens its more of a stutter than a

complete cut

no fuel cut though, it doesnt cut out, it just stops accelerating. boost drops, and it will just stay at 5500rpm, wont drop below that and wont go above that... bloody weird, cleaned AFM, new plugs, and new coils. checked for any leaks, nothing. reset ecu, nothing... im lost now.

if i didnt just get fired, id opt for a Power FC, but gotta save money now.

sticking wastegate maybe?????

also just found this out, it has one of 2 problems,

Problem 1: any gear it wont rev up past the 5-6k mark but if it does manage to rev normally, problem 2 occurs

Problem 2: 1st gear, revs and hits boost and its all normal, hit 2nd and it has a 1 second cutout at 5-6k rpm, change to 3rd and it will continually cut out 5-6k rpm...... and same in 4th, cant hit above 5k rpm in 5th, it can only get to 180kmh

so if its not problem 1 its problem 2...... pissing me off!!!!!! RAAAAGE QUIT!!!!

oh, bad news for me today, i decided to install a boost gauge today to see what the turbo is running, as we all know i cant read or make out what the stock boost gauge says, it says -7 all the way to +7 mmhg, so connected the new gauge which is psi, i plugged it in between the manifold and purge valve, and took the car for a run, the boost gauge hit 13psi at 5000rpm in first and hit 15.5psi in 2nd and 16psi in 3rd. so if this is anything to go by, im pretty screwed.

all i did was disconnect the boost solenoid and did the constant 7psi trick as talked about, or so i hoped. guess it seems to be a 15psi trick instead.....

just changed back to original solenoid, and it runs back at normal PSI, 350mm/hg which is 6.8psi, so the original boost gauge is pretty spot on. before it went beyond the +7 on the boost gauge (700mm/hg= 13.5psi) damn!

so the 2 pipes that go into the solenoid, i originally bypassed, hose-solenoid-hose, i bypassed that and just connected the 2 hoses directly without the solenoid in the middle. thought it would just sit at 7psi like people said it would, but it didnt did it??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...