Jump to content
SAU Community

F/s 1993 R32 Gtr Gun Metal Grey (Nsw)

*D-Joker*
 Share

Recommended Posts

*D-Joker* Rookie

*D-Joker*

Posted
Posted (edited)

hey people,

Car: 1993 R32 GTR, Gun metal grey, basically stock.

Location: Liverpool, NSW

Description: the car is basically stock apart from a cat back stainless exhaust, Greddy turbo timer and a unknown brand speed cut, which were all on the car when i got it.

the car is very clean, not a spot of rust, its has 98xxx km's on the clock, have not had an issue with it... not sure if all gtr's come standard with it but i got the 320 km/h dash.

not sure what else to say, the car pretty much speaks for itself.

Reason for sale: i have had the car for over a year now, and i have been waiting to drive it due to me being a p plater and obviously not being able to drive a turbo'd car, so im sick of waiting and want to build something different now, something i can actually drive and not jus clean haha.

rego: will put a fresh 12 months of rego on it when sold, or alternatively will reduce price and sell un-rego'd.

...if there is anything i missed just let me know or anything else you want to know and i will get back to you as soon as i can

Price: $21,000

if interested call me (Marc) on: 0412 306 857, anytime after 5pm.

p.s... will try and get some more pics up tonight

post-72402-0-33794100-1312253464_thumb.jpg

Edited by *D-Joker*
Link to comment
https://www.sau.com.au/forums/topic/372788-fs-1993-r32-gtr-gun-metal-grey-nsw/
Share on other sites
  • 4 weeks later...
*D-Joker* Rookie

*D-Joker*

Posted
  • Author
Posted (edited)

i dont know why but i cant change my first post, any suggestions?

anyways... is there any interest?... price $20,000 is negotiable, or would consider swaps... my daily shit itself, and rather than fix it i would prefer to get somethin else.

Edited by *D-Joker*

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • TurboTapin
      Jacks that fit under GTR lips that can reach the subframe?

      By TurboTapin · Posted

      So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • suko
      J50 clock date suddenly reset to January 1

      By suko · Posted

      Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • Dose Pipe Sutututu
      Chris' Toyota Mark ii JZX110

      By Dose Pipe Sutututu · Posted

      I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
    • MBS206
      Starter motor replacment teeth count.

      By MBS206 · Posted

      I saw your intro update, are you sure you've actually had a starter motor failure? You mention it could be the alarm causing it. I'm assuming you've got a no start issue, but what are the exact symptoms, as there could be a few reasons it has stopped wanting to start.
×
×
  • Create New...