Jump to content
SAU Community

Recommended Posts

depends on what you want to run it on ?

how loud you want it?

cost range?

brand loyalty?

size?space you have

what ohm load your running it at ?

how much do you want to spend on wiring upgrades and alternators, battteries ?

do you want class, A, AB, D, Hybrid ? why mono ? you can do stereo amps as well ?

do you want sound quality, and control of your woofer ? or just bass

what size woofer, what box is it in ?

a 50 dollar 1500 watt mono block is nasty

and 2000+ dollars would one be fine

but Im sure as you can see you need to answer more questions to make a informed decision and be happy with it

why 1500 watts, ? RMS or max power ? real world ?

good power for a mono block, is 24,000 watts at 1 ohm. but you battery load would be retarded

Edited by sapphiregraphics

powering what ? a 900 watt sub from jensen or amp from jensen ??

the sony is a small step up at best ? it wouldnt be my first choice for a budget sub amp.

Edited by sapphiregraphics

Id suggest just getting a 900watt RMS (stated) or higher Kenwood mono D amp. Assuming thats a DVC/2ohm sub. They are cheap and dont sound too bad and will put out about 400RMS at 60hz at 2Ohm stable which is probably more than a sony "1500" could handle. But in all honesty sony dont really make high power subs so any $250 amp is likely to max it out

Edited by deano3350

it depends on all the thing i asked before?

and what kind of box the subs in

how loud do you want it?

do you have the subs model or ohm load, how many voice coils?

yada yada yada, as above

are you running a amp on the front speakers or deck power?

kenwood is decent cheap amp ?

the new sony speakers are rated around 1500watts "PEAK" power and around 400 rms, for anything more then a few seconds in the wrong box or clipping will kill the woofer ?

what are you trying to do exactly ? louder? deeper ? clearer ?tighter bass ?

it might be a waste of money to drop a big amp on a poor sub in a generic box , mounted wrong or x-over wrong ?

Are you after sealed or ported? how much space are you willing to lose? because if you want "reasonable amount of undistorted bass" your going to need to tune the box which Sapphire would be able to tell you all about

ok, well its a four ohm sub single voice coil, just want a resonable amount of undistorted bass

Like before

price range ?

amount of space you want to loose ? what kind of box do you have now ? sealed , ported, factory , generic , approx how big is it ?

sub model ? so I can see the Thiele parameters

what kind of music do you listen too mostly ? how loud ? and what source is it most of the time, MP3 , radio, CD ? some music lends itself to a different box , and same with loud volumes, safer for the woofer

what head unit type are you running, ? do you know the specs for line out voltage ? because if your amp needs high level inputs or converter that will make a difference ?

I take it this is in a R31 4 dr ?

do the front speakers use a amp or deck power ?

without answering these questions its hard to help you find options , just throwing a 2000 dollar amp on it wont make it sound better if its in free air, or the deck has convertors and playing MP3 at low bit rates

this might be as simple as a few bucks worth of poly fill, and reseal the woofer, change the crossover point or face the box another direction to make it sound better ?

about 300 bucks maybe more, space im happy to loose most of the boot, the box is a 50 litre ported, its an xploid 15 1500w thats all i know, i tend to listen to linken park, acdc etc in high quality mp3, im running a sony xploid 4x45 watt?, front speakers are deck power

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...