Jump to content
SAU Community

Recommended Posts

As the title says I have a Z32 Nistune ECU for sale.

This ECU has had the Nistune type 3 daughter board fitted and has also been modded for use in the ECR33 by Nistune in SA.

This is a complete, plug-in, real-time tunable ECU solution for the ECR33 that requires no other mods or wiring.

Comes with PLMS USB consult cable worth $95!

$450 + shipping anywhere in Aus/NZ

:thanks:

Edited by Checkbuzz
Link to comment
https://www.sau.com.au/forums/topic/374113-nistune-ecu-for-ecr33/
Share on other sites

See below for pix (including consult cable, serial no, daughter board and wiring mods to suit R33) & yes this ECU will be good to go for the series 2 ECR33!

PM on it's way!

So its for the later model z32 board?

Im sure this would be compatable with the series 2 r33 if so

pm me your bank details and consider this sold

Thanks Christian

post-52301-0-85817900-1313403310_thumb.jpg

post-52301-0-92641600-1313404449_thumb.jpg

post-52301-0-53699600-1313404461_thumb.jpg

post-52301-0-24805800-1313404557_thumb.jpg

Yes you are correct mate... my mistake - as you can see from the pix it is actually a type 2 board :P

I was under the impression a r33 using z32 ecu needed a type 2 board???

Edited by Checkbuzz

Still available... lots of interest but no sale yet

If you had this for sale a week ago it would have gone the day i saw it.

I only just bought and intalled one in my 33.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...