Jump to content
SAU Community

Recommended Posts

Hi All,

I've got the above for sale. The clutch is still currently in my car so I am unable to take photos as yet. However, once purchase i can have it removed within a week. It is a clutch kit, so comes with a lightened flywheel and I'll add the push/pull converter.

Reason for sale is that clutch is currently slipping when i am trying to run 2bar boost. It is running 442awkw fine at the moment without slip and has only seen about 8000km, it hasn't seen any track days and really only street driving, the casual launch but in saything that, currently works fine. Clutch feels just like a standard BNR34 clutch with of course the extra grip. Flywheel has also been balanced before it was fitted in to my car.

Pictures of it can be found on Nengun link below:

http://www.nengun.com/ats/carbon-clutch

Price i am looking for is $1600. Nengun is selling for about $2753 (without the push/pull converter)

Link to comment
https://www.sau.com.au/forums/topic/374248-ats-twin-carbon-plate/
Share on other sites

Well the last time it was run, was on the powertune dyno, where i was running 1bar HKS actuators and it seem that the actuator couldnt hold the power. At the time i could only make 441awkw @ 1.5 bar with actuators set by electronic boost controller to 2bar, dropped to around 1.5bar with the car running fine on the dyno and without any slip at all.

It was running perfectly fine @ 441awkw, after i changed to 22psi actuators and set it to 1.8bar, slipped from about 6000rpm in third gear. Not exactly sure what power i would've been making at 1.8bar, possibly about 460-470awkw.

So if you aiming for about 450awkw which is pretty much most people running -5s, i'd say this is the perfect clutch for you, whereas my car will hit closer to the 500awkw mark.

Edited by destrukshn

450kw@4wheels -5's?? do you mean -10 gtrs?

No, i mean -5's. If i had a set of -5's on my GT-R now i am pretty confident i'd be able to push 450awkw out of it.

There are a few people on here who have had about 450awkw from 2530s/-5s.

I am running the Garrett -10 equivalents on my BNR34, the HKS GT-RS. In saying all this, i am running e-85..

Anyway, back to the thread, reason for selling is because i am looking to move to a triple plate :)

Any offers?

No, i mean -5's. If i had a set of -5's on my GT-R now i am pretty confident i'd be able to push 450awkw out of it.

There are a few people on here who have had about 450awkw from 2530s/-5s.

I am running the Garrett -10 equivalents on my BNR34, the HKS GT-RS. In saying all this, i am running e-85..

Anyway, back to the thread, reason for selling is because i am looking to move to a triple plate :)

Any offers?

I have got a brand new ATS triple carbon ear marked for the Veilside.not putting it in as the car has been detuned to stock 240kwaw, don't need this clutch. reserved for my GTR33 track car running GT35/40.Nismo twin plate

Alex 0433878905 Melbourne

whats the model number for that clutch? is it (CN23310-11)

CN23220-11 is correct! :)

I have got a brand new ATS triple carbon ear marked for the Veilside.not putting it in as the car has been detuned to stock 240kwaw, don't need this clutch. reserved for my GTR33 track car running GT35/40.Nismo twin plate

Alex 0433878905 Melbourne

Hi Alex,

PM Sent.

will only suit a R34 wont it ?

Hi Blitz-26,

Well it will fit anyone running the BNR34 Getrag.

why dont u get the CN23225-14 will that hold because im hoping to make the same power and i was looking at the same 1

I might, however, hoping i can sell out my one first and i'll order a new one :)

Lots of questions, but no one interested yet!

Come on guys, great clutch, near new condition! I dont even ride the clutch, not my driving style! :)

have one of these in my 34, brilliant clutch. Running 400rwkw and plenty of torque (E85) and all seems fine :)

very streetable clutch that can still handle a fair whack of power/torque

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...