Jump to content
SAU Community

Recommended Posts

So very productive weekend was had.

Posted Image

Just gotta few more plugs to plug in and extend. Bell housing bolts. Bolt power steer pump back up. And modify my cooler piping.

As can be seen here....

Posted Image

And this is my mates wife. She got bored and decided my clutch was to dirty.

Posted Image

She went on to clean the entire motor haha.

ok more updates

fuel system is all plumbed up

cooler piping sorted (still need to get a fitting welded in for the AIC)

20131130_151715.jpg

20131130_151725.jpg

20131130_151734.jpg

a few other little bits and peices done here and there.

20131201_104211.jpg

20131201_104223.jpg

sold my work equip anhelos on thursday just gone.

very sad.

but decided itd be a better idea to have a matching set of 6 wheels.

so i plan on buying 6 XXR 531's in 17x9+25 all round

.53168467-2.jpg?1375101646

so i thought id better test fit a 9" wheel to the front.

this is a 17x9+38 with a 25mm bolt on spacer.

20131201_104152.jpg

Edited by DannyC33

so i found a set of modded knuckles for sale... and couldnt say no to them

$250 for s14 knuckles.

lock increase and ackerman adjusted.

20131203_211049.jpg

also ordered my wheels tonight. and according to the website ill have them in 5 days! from the usa!

  • 2 weeks later...

oh and they actually rocked up yesturday.

unfortunately its gonna be a while before i can get them fitted up as i was in a car accident on saturday just gone and my daily driver was written off.

so all my spare money i had aside for the laurel has gone to buy a new daily.

not happy. but hopefully the insurance company of the guy that hit me wont take to long to pay me.

yeah i did.

turns out i shouldnt own r31s. have written three off in not at fault accidents.

a mate came round yesturday and test fitted my modded knuckles for me.

gonna have to spend a bit of money gettin everythin to clear now. hits everywhere haha.

.... havent got lock stops on my arms. currently hits the castor rod and the inner well at the back. haha. and arms are binding.\

turns out the knuckles ive bought are freakin insane also,

they actually run reverse ackerman by the looks of it.. and are extremely quick.

should be interesting. i predict a shit load of spins happening. haha

im only running stock arms at the moment, thats probably got a fair bit to do with it id imagine. haha

its not actually hitting the inner well at the moment. i havent got tyres fitted to the XXRs yet. we just mounted one of them to see what i was likely to hit,

will be getting tyres fitted in the new year. at the moment im not even allowed to touch a car because of the bloody crash.

  • 2 weeks later...

i would but this is basically gonna be driven on the street maybe a couple times a year,

and after spending this year in the passenger seat of my mates 180 track car. i really want a pair of sparco seats.

i still found that on the track with the recaros i was having to brace myself on the centre console/door. admittedly I haven't installed my harness yet, but I figure someone else might as well put the road legal recaros to good use.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...