Jump to content
SAU Community

so who is getting/just got owned at megamart in thomo?


Recommended Posts

drove past in the 4wd to see the car park full of what looks like to be some sort of meet (possibly mccr?) and even more at the kfc down the road on dalton road, thomastown.

gf says: wtf is going on here? theres a shit load of cars

i look, and see cop car blocking both exits

that'll learn ya for going into private property after hours and making a mess...

yeah I saw it while driving past as well... the Dalton Rd exit was closed off by 3 (yes THREE) unmarked cop cars... I was driving in from the city and took the ring rd to get to Mill Park.

Sounds like the illegal drags are back in thomo....usually when someone pics up the cops on the scanners... thats where everyone meets.... The drags are done not far from there...last time i knew there were behind strathfield car radios off settlement road and near one of the rotary workshops...not sure what its called though

lol everyone knows about the street next to strathfield... the number of times me n my mates went down there to compare each other's cars. This one looked huge tho, there were easily 30-40 cars in there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...