Jump to content
SAU Community

Recommended Posts

OK, So my r34 Gtt is in having a head gasket done and am planning on getting a Boost Controller on and Bosch Fuel Pump done also to run a lilttle more boost.

Going slowly, I eventually want to aim for around the 250 kw mark. I've read quite extensively on SAU on what I'll need to do to acheive this and have decided to go for:

Hyper gear Highflow turbo

Nistune ECU

Z32 AFM

Injectors of some sort

The car currently has 3" Kakimoto full zorst

Greddy FMIC.

I'm wanting some advice as to where to after I have the Boost Controller and Fuel Pump done, I dont have the $ at the moment to do all these mods at once but wanted to spend around $1000 on the next mod and wondering if I get the turbo high flowed?, Or go the Nistune first

Ideally I'd like the car to be safe and driveable before the next upgrade!

Any help appreciated.

Cheers guys.

Link to comment
https://www.sau.com.au/forums/topic/376151-r34-gtt-build/
Share on other sites

Well you have two options if you want to buy the parts eventually then you can get the nistune first and get the car tuned how it is at the moment and then you will have to have it reutned again when you get the turbo or your 2nd option is to just buy the parts and dont put them on til you have everything and do it all in one go which will save you having to retune again. You can stick the new turbo on and drive around as it is but thats not ideal as its not tuned for it so I wouldnt be doing that.

Link to comment
https://www.sau.com.au/forums/topic/376151-r34-gtt-build/#findComment-5999475
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...