Jump to content
SAU Community

Recommended Posts

Thanks Mike.......the middle clip was sticking (probably because I had the left and right out together and it was an awkward angle...but yeah got there in the end with a bit of coaxing. Had to get the grille off to tighten up one of the front bar bolts....

Right............

So first up..........its been a fairly productive day and I am quite happy with what was covered.

Started off with painting the boot badge. Sanded it down a little bit....and then sprayed a couple of coats of black and topped it up with clear.

Came up quite nicely...its currently drying so I will put up pictures of that later.

This was during the process.....

20120920_134652_zpsf8c61afd.jpg

Then off to bunnings to get a nice pointy paintbrush and some more masking tape.

20120920_144012_zps7bf559ef.jpg

Then I pulled out my homemade ramps...got the car up to a nice comfortable height and then I settled down to fill in all the stone chip marks. This took ages as I had to fill in each tiny mark and be careful not to smudge them or mess it up etc.

Car was pretty dirty from last nights rain so quite a bit of it was just road grime...which washed off.

20120920_161318_zpsaf805503.jpg

Will post up finished pics in the morning...its too dark now.

The intercooler piping always stands out when you look at the car from the front (not necessarily in a good way).......read up a little bit about piping etc and decided that the supposed disadvantages of a thin layer of paint on a small section of visible piping was'nt going to result in me being the slowest skyline out there and besides I wanted something different so decided to do this...

20120921_124135_zps8b4b6fc6.jpg

and................................taaadaaaa.........

20120921_151512_zpsec3375ec.jpg

Looks so much better in the flesh and not from a crappy smartphone camera :verymad:

Hahahaaa.......good question actually....

Wipers were a spur of the moment decision while I was working on the trims.....so being unplanned I just did them when I thought they needed a touch up.

Attempted to take out the boot lock....but the left bolt was done up so tight that it snapped.....so I now have half a shaved bolt still stuck in there...and its held together by the right one :down:

Intercooler piping.....ummmmm.....dont know actually.....

Guilty as charged !! :spank:

  • 2 weeks later...

Quite happy with the end result.......

Before.....

DSCN1693_zps32c8c8ec.jpg

After...........

DSCN1742_zps3f8436d7.jpg

You cant really see it in detail from this picture..but it gives a basic idea of what it looks like now...Its drizzling and cloudy at the moment so will post some pics when I take her out for a spin later when the paint has dried completely....

  • 3 weeks later...

Its think its time for new brake pads (can feel the car not biting anymore under braking) so thats what I did this morning.....

While taking off the front wheel I realized the wheel arch area looks something like this.........this was before I did the calipers and drum so yes it is an old photograph but it will suffice as I didnt take one of the condition of the arch before tidying it up.........

20120727_093353.jpg

So decided to give it a spruce up...........

Touched up the drum and calipers again too....noone ever said no to an extra coat !! ...and touched up a little spot on the intercooler piping that had a stone chip mark.

20121025_170718.jpg

Most of the gack just came off after a good clean but I sprayed the trims and arch just for good measure.

DSCN1761.jpg

I'd be rather cautious spraying the underside (inside the guards etc..) as you will make a prospective buyer (one day if you sell) very wary that it's been in an accident...

Just my 2 cents.

SELL !! :O (the horror).....hahaa

Yeah no that makes sense (very valuable 2 cents indeed).......but then again...I dont plan to sell (ever) and if push comes to shove and I am reeeally forced to etc then they can look at this forum or the zillion other pics I have and judge the condition of the car themselves :yes:

Personally I think it looks really nice all cleaned up and I must say degreaser works a treat. The paint is just bonus and its the anti rust stuff so hopefully that helps too.

Did the back arch all of this morning............

DSCN1774.jpg

Hey Joe (see what I did there)....................hahahaaaaaaaaaaaa

Anyways.....

In this particular case (for the arches etc) I used high temp brake and caliper paint.....because I had / have heaps of it lying around that I bought on special a while ago...its mainly trims and underside bodywork...so I wasnt too fussed about undercoats / sanding blah blah blah....just a good chemical clean up and boom...spray..although I did use plastic primer for the guards... It is probably not the "correct way" and I bet there are many "gurus" who would shudder at the thought and jump down my throat...but who cares...it looks awesome....and even if it doesnt work...its not exactly very visible anyway....Its for me to know that it looks nice :) oh and I just went with "gloss black".

Did the intercooler piping with the same stuff and mighty impressed with the finish and how it lasts etc...did it a few weeks ago and it hasnt peeled etc...even after some heavy spraying during cleaning etc....time will tell (worst case I will do it again)

I will keep updating pics so hopefully you can tell how its lasting etc.....I am not a paint know it all by any means..but I like this trial and error approach and as long as I stay away from the bodywork and critical working components I think I am fine.

Also I DO follow these basic guidelines...plastic and vinyl primer before any paint on trims etc...which really gives the paint something to cling on to...have tried both ways on kick panels so I can comment.

Metals and engine / brake components.....high temp paint for sure....good clean / degreaser...light sand...metal primer and simple spray on.

Also just for the record.....ALL the paint related stuff I have done thus far has worked beyond expectations....bootlid....bonnet...interior trim bits...dash....badge...seat rails....calipers...drum....front lip...arches..etc

So yeeeaahhhh.....................

Anywho.....waiting for my days off to do the left side.......and then hopefully the week after I can move onto some engine bay detailing.

:thanks: man....

In other news...........

Had my tooth out today....hurts like a bitch....so cant really do anything today.

Have however borrowed a "high tech" camera from a mate...so plan to give her a good spruce up tmrw morning and get some half decent pictures happening.....

Photoshoot postponed................

Another picture of the front arch.....inner guards came up a treat...very happy.

20121025_183130.jpg

Did the left rear arch this morning.............So now only the front left remains...which I will finish off tmrw

Edited by jez NF
  • 2 weeks later...

Good ol brasso hey......

These are the only pics I have sadly.....I have to use my phone when I work....or I will "dirty the house" (and I keep forgetting to get the camera beforehand) !!

The homemade ramps were put to good use again....

20121121_120723.jpg

Its pretty dim in the garage.......looks so much better in natural light.....

Next up I plan to attempt an oil and filter change.....and plan to paint the exhaust connecting pipes....provided I can successfully figure out how to get the whole exhaust system off first.

20121122_104905.jpg

Made myself a little "workstation".......................with some leftovers lying around. :nyaanyaa:

IMG-20121126-WA0002.jpg

Cannot wait for this year to be over so that I can start spending some big ones on the car again...all these small scale projects just don't quite make the cut :dry:

The useless git who did my last service can go to hell......to say the bolt was a pain to get off is an understatement.....sprayed the crap out of it with WD40 and used a 1/2 " drive breaker bar to get it off !!! :verymad:

But so far so good.....oil changed...new shiny black filter in....and presto....my first oil and filter change all by myself..and no mess (not much) haha (pats himself on the back)

20121129_130801.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
×
×
  • Create New...