Jump to content
SAU Community

Recommended Posts

For sale:

A pair of R33 Skyline Headlights out of a GTST Series 1.

I brought a new pair and these were what got replaced. Driver side headlight has had a crack in the plastic housing (not the clear plastic) but this has been sealed up. Nothing else is wrong with it, that's how it was when I brought the car and I replaced the headlights due to being fussy.

Nothing else too major to worry about, both headlights are a little yellow, nothing a polish won't fix. I'll confirm anything else I find about them tomorrow when its daylight, including posting up some pictures. Only asking $100 for the pair, need them out of my shed!

RB25DET Viscous clutch and fan $40

R33 Series 1 GTST Front and Rear seats. $50 & $40

R33 Series 1 Steering wheel $40 (One with the " S " on the middle. No air bag)

(Currently taken apart in attempt to make the horn press in better, & will assemble it back completely for anyone who wants it.)

What I believe to be a R34 ECU and engine loom

$70 for ECU and $70 for the loom

(It's missing a few plugs off the loom and I'll confirm with photos and model numbers what exact loom and ECU it is.)

An R33 or R34 alternator. (No idea which one it is, I'll post up some photos.) $50

180sx crank angle sensor $50

Also have the bottom half of a RB25DET engine/block. Might keep it for now, yet won't refuse a reasonable offer. Feel free to ask any question about this, I really have no idea what I'm looking at. All my knowledge is in the top half of the engine. :P

I'm located in Melbourne, Burwood, cash on pick up would be great. Contact me on: 0409 767 893 (Text only please as I'm at University during the week, feel free to call me during weekends at any possible hour.) Email: [email protected] or PM me on here.

Also a few of these are on eBay

Will swap anything above for a RB25DET stock intake plenum (must have the bottom half!) or a RB25DET cas/cam sensor, a working car head unit so I can actually have radio again, any type of turbo timer or boost controller. Or just offer me some more Skyline parts.

post-86488-0-46608300-1316440569_thumb.jpg post-86488-0-11671500-1316440616_thumb.jpg post-86488-0-29417400-1316440655_thumb.jpg

post-86488-0-96505000-1316440683_thumb.jpg post-86488-0-29182100-1316440707_thumb.jpg post-86488-0-37799300-1316440730_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/377710-lots-of-r33-parts-other-bits/
Share on other sites

For sale:

A pair of R33 Skyline Headlights out of a GTST Series 1.

I brought a new pair and these were what got replaced. Driver side headlight has had a crack in the plastic housing (not the clear plastic) but this has been sealed up. Nothing else is wrong with it, that's how it was when I brought the car and I replaced the headlights due to being fussy.

Nothing else too major to worry about, both headlights are a little yellow, nothing a polish won't fix. I'll confirm anything else I find about them tomorrow when its daylight, including posting up some pictures. Only asking $100 for the pair, need them out of my shed!

RB25DET Viscous clutch and fan $40

R33 Series 1 GTST Front and Rear seats. $50 & $40

R33 Series 1 Steering wheel $40 (One with the " S " on the middle. No air bag)

(Currently taken apart in attempt to make the horn press in better, & will assemble it back completely for anyone who wants it.)

What I believe to be a R34 ECU and engine loom

$70 for ECU and $70 for the loom

(It's missing a few plugs off the loom and I'll confirm with photos and model numbers what exact loom and ECU it is.)

An R33 or R34 alternator. (No idea which one it is, I'll post up some photos.) $50

180sx crank angle sensor $50

Also have the bottom half of a RB25DET engine/block. Might keep it for now, yet won't refuse a reasonable offer. Feel free to ask any question about this, I really have no idea what I'm looking at. All my knowledge is in the top half of the engine. :P

I'm located in Melbourne, Burwood, cash on pick up would be great. Contact me on: 0409 767 893 (Text only please as I'm at University during the week, feel free to call me during weekends at any possible hour.) Email: [email protected] or PM me on here.

Also a few of these are on eBay

Will swap anything above for a RB25DET stock intake plenum (must have the bottom half!) or a RB25DET cas/cam sensor, a working car head unit so I can actually have radio again, any type of turbo timer or boost controller. Or just offer me some more Skyline parts.

post-86488-0-46608300-1316440569_thumb.jpg post-86488-0-11671500-1316440616_thumb.jpg post-86488-0-29417400-1316440655_thumb.jpg

post-86488-0-96505000-1316440683_thumb.jpg post-86488-0-29182100-1316440707_thumb.jpg post-86488-0-37799300-1316440730_thumb.jpg

Hey mate, pity your not in SA, I would love a new front seat, mine has a rip and some stains... but id assume courier would cost just as much as the seat itself..

I could find out some prices for you? Although the seat in my photo with the wearing is the drivers side. :(

Oh okay, mines worse exposing the metal bit, thanks anyways ill keep looking and let ya know :)

Here is a photo of the ECU and loom that I have. Actual photo taken by me, no idea what car it's off. Please help me out. :P

http://imageshack.us/photo/my-images/192/img20110923003628.jpg/

  • 3 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...