Jump to content
SAU Community

Recommended Posts

For sale:

A pair of R33 Skyline Headlights out of a GTST Series 1.

I brought a new pair and these were what got replaced. Driver side headlight has had a crack in the plastic housing (not the clear plastic) but this has been sealed up. Nothing else is wrong with it, that's how it was when I brought the car and I replaced the headlights due to being fussy.

Nothing else too major to worry about, both headlights are a little yellow, nothing a polish won't fix. I'll confirm anything else I find about them tomorrow when its daylight, including posting up some pictures. Only asking $100 for the pair, need them out of my shed!

RB25DET Viscous clutch and fan $40

R33 Series 1 GTST Front and Rear seats. $50 & $40

R33 Series 1 Steering wheel $40 (One with the " S " on the middle. No air bag)

(Currently taken apart in attempt to make the horn press in better, & will assemble it back completely for anyone who wants it.)

What I believe to be a R34 ECU and engine loom

$70 for ECU and $70 for the loom

(It's missing a few plugs off the loom and I'll confirm with photos and model numbers what exact loom and ECU it is.)

An R33 or R34 alternator. (No idea which one it is, I'll post up some photos.) $50

180sx crank angle sensor $50

Also have the bottom half of a RB25DET engine/block. Might keep it for now, yet won't refuse a reasonable offer. Feel free to ask any question about this, I really have no idea what I'm looking at. All my knowledge is in the top half of the engine. :P

I'm located in Melbourne, Burwood, cash on pick up would be great. Contact me on: 0409 767 893 (Text only please as I'm at University during the week, feel free to call me during weekends at any possible hour.) Email: [email protected] or PM me on here.

Also a few of these are on eBay

Will swap anything above for a RB25DET stock intake plenum (must have the bottom half!) or a RB25DET cas/cam sensor, a working car head unit so I can actually have radio again, any type of turbo timer or boost controller. Or just offer me some more Skyline parts.

post-86488-0-46608300-1316440569_thumb.jpg post-86488-0-11671500-1316440616_thumb.jpg post-86488-0-29417400-1316440655_thumb.jpg

post-86488-0-96505000-1316440683_thumb.jpg post-86488-0-29182100-1316440707_thumb.jpg post-86488-0-37799300-1316440730_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/377710-lots-of-r33-parts-other-bits/
Share on other sites

For sale:

A pair of R33 Skyline Headlights out of a GTST Series 1.

I brought a new pair and these were what got replaced. Driver side headlight has had a crack in the plastic housing (not the clear plastic) but this has been sealed up. Nothing else is wrong with it, that's how it was when I brought the car and I replaced the headlights due to being fussy.

Nothing else too major to worry about, both headlights are a little yellow, nothing a polish won't fix. I'll confirm anything else I find about them tomorrow when its daylight, including posting up some pictures. Only asking $100 for the pair, need them out of my shed!

RB25DET Viscous clutch and fan $40

R33 Series 1 GTST Front and Rear seats. $50 & $40

R33 Series 1 Steering wheel $40 (One with the " S " on the middle. No air bag)

(Currently taken apart in attempt to make the horn press in better, & will assemble it back completely for anyone who wants it.)

What I believe to be a R34 ECU and engine loom

$70 for ECU and $70 for the loom

(It's missing a few plugs off the loom and I'll confirm with photos and model numbers what exact loom and ECU it is.)

An R33 or R34 alternator. (No idea which one it is, I'll post up some photos.) $50

180sx crank angle sensor $50

Also have the bottom half of a RB25DET engine/block. Might keep it for now, yet won't refuse a reasonable offer. Feel free to ask any question about this, I really have no idea what I'm looking at. All my knowledge is in the top half of the engine. :P

I'm located in Melbourne, Burwood, cash on pick up would be great. Contact me on: 0409 767 893 (Text only please as I'm at University during the week, feel free to call me during weekends at any possible hour.) Email: [email protected] or PM me on here.

Also a few of these are on eBay

Will swap anything above for a RB25DET stock intake plenum (must have the bottom half!) or a RB25DET cas/cam sensor, a working car head unit so I can actually have radio again, any type of turbo timer or boost controller. Or just offer me some more Skyline parts.

post-86488-0-46608300-1316440569_thumb.jpg post-86488-0-11671500-1316440616_thumb.jpg post-86488-0-29417400-1316440655_thumb.jpg

post-86488-0-96505000-1316440683_thumb.jpg post-86488-0-29182100-1316440707_thumb.jpg post-86488-0-37799300-1316440730_thumb.jpg

Hey mate, pity your not in SA, I would love a new front seat, mine has a rip and some stains... but id assume courier would cost just as much as the seat itself..

I could find out some prices for you? Although the seat in my photo with the wearing is the drivers side. :(

Oh okay, mines worse exposing the metal bit, thanks anyways ill keep looking and let ya know :)

Here is a photo of the ECU and loom that I have. Actual photo taken by me, no idea what car it's off. Please help me out. :P

http://imageshack.us/photo/my-images/192/img20110923003628.jpg/

  • 3 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...