Jump to content
SAU Community

Wtb: Rb25 Stock Turbo & R32 Gts-t Front Windscreen


Recommended Posts

Hey guys im chasing after an RB25 stock turbo for my RB20. Looking for one obviously that has no shaft play and is still in good to perfect condition. If you have one for sale let me know on here or through PM.

Also chasing a front windscreen for an R32 GTST with no cracks or chips in it.

Cheers Freddo32 :cheers:

PM sent

ive got two stock rb25det turbos-both with minimal shaft play

also have

-GoFastBits [GFB] "Deceptor" blowoffvalve

Almost new-doesn't have an adapter-you can buy them online from gofastbits.com.au

Red/silver/chrome colour

Can be setup as either plumback/legal or atmo by turning middle adjuster

Sound can be adjusted from quiet to freakin loud by turning top adjuster

They sell for $349.00 new-check GFB Aussie website link...

$300 ono

http://www.gfb.com.au/index.php?option=com_virtuemart&page=shop.browse&category_id=210&Itemid=107

buy a new windscreen.. they should be about 200 fitted.

you wont regret it

Hey mate, who's would this be through because i tried Obrien's and they were looked at charging me 600 minimum fitted :S

Still chasing a cheap BOV for my rb20det, must be plumb back :D

I purchased a rb25 turbo recently but thanks anyway hcr324door!

if ur in SA "complete windscreens" are less that 200

the windscreens themselves are about 20-30$ wholesale to them so much above 250 is a joke just for insurance companies

Hmmm im in QLD but ill definately look around a bit more because 600 bucks is a bloody rip. I'll try some smaller companies they might be more reasonable eh :)

Cheers mate

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...