Jump to content
SAU Community

Recommended Posts

Gday all after some longggg hunting im thinking of seeing anyone thoughts on modifying a rb30 turbo exhaust manfiold to suit a rb25 as i really want to stay low mount with my rb25/30 not to keen running a external gate on a stock rb25 manifold as i dont think i will hit the 320rwkw mark on lowish boost hence after looking at the rb30 turbo manifolds it looks like it would be perfect to fit a wastegate right on top of the merge collector

just looking to see how much roughly this would cost and if its just a matter of cutting and re welding the flange to suit the rb25 im trying to keep my manifold budget under 450 and cant really find a hks manifold around for this

any help would be great cheers

Link to comment
https://www.sau.com.au/forums/topic/378986-rb30-manifold-on-rb25/
Share on other sites

you wont have a proper external gate setup for under $450, simple as that.

the hks manifolds can be had for around 600, but as with any aftermarket manifold theres other costs in getting it all together and running.

ive found a few hks manifolds for 400 but they sell before i get a chance to buy them

all i want to know is if i get the exhaust flange on the rb30et manifold changed to a rb25 are all the spacing correct is it only 2 or 3 flanges that need to be changed also will it fit and will it flow better then a stock rb25 manifold

i can get a vl turbo manifold for 100 another 150 to get a wastegate flange welded and the flanges changed

stock rb25s ive been told and after reading a lot of dyno results they hit a brick wall around 280-30rwkw mark im currently aiming for 320rwkw atm then push it to 350rwkw on my rb25/30

i have a highmount but would love to try something different with the rb30 idea

wait your talking about a standard vlt manifold? they flow the same if not worse than a standard 25 manifold. absolute waste of time modifying it to fit.

you cant set it up to handle 350rwkw with a budget of only $450. either use a standard manifold and setlle for less power or keep saving and do it properly

ive seen alot of guys including my mates make well over 320 out of a stock vlt manifold my old hr31 coupe made that out of a rb30

my $450 budget is only for a manifold nothing else

if i cant get 320rwkw out of a low mount manifold

i will keep my highmount and settle with that

but would love a low mount

really on a stock 25 manifold???

all the results ive seen on the rb25/30 thread i couldnt see more then 2 on there

320rwkw is a personal goal im trying to reach i want more then what ive had before ive had a hr31 coupe with 310rwkw a charged 355 with 308rwkw its just something i want

no idea what a r33 with a rb25/30 fitted with a gt3582r with 320rwkw will be like to drive on the road but hey thats the fun part

it just came across my mind i wonder if a rb30 manifold could fit but if it wont its ok ill stay highmount if i cant find anything else

only reason why i like the 30 idea is it looked alot like the hks manifold design

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...