Jump to content
SAU Community

For Sale ! R34 Gt-T Shell And Bits

rb20-into-mr30=
 Share

Recommended Posts

rb20-into-mr30= Collaborator

rb20-into-mr30=

Posted
Posted

hey guys and girls, I found a r32 gtr at a price i couldnt refuse so I regrettibly have to get rid of my r34 project.

it was to be a z-tune replica with an ls1 but I cant have 2 projects on the go.

so basiclly i have the r34 gtt shell and parts as follows:

1 spare drivers door

front hubs

2 front cross members

2 spare tail lights minus plastic garnish

front and rear suspension (std)

2 dash pads

there are no front or rear reo's or bumpers nor side skirts either.

the shell has rear drive train including the auto tailshaft, and every thing is there for the front I just need a few bolts to be able to put it back together.

It has a shopping trolley under the front to keep it rolling.

As for the shell itself, it was a repairable write off with minor damage on the front drivers headlight and a nasty

cut down the drivers side, hence the spare door(same colour) I was going to put gtr rear guards on to cover it up.

I would prefer to sell the whole lot( shell and parts) in one go for $1400 but if there is no interest in that I will happily part it out

at cost price or less. i bought all the parts and spares from fellow sau users real cheap so in return i'll sell them cheap.:cheers:

Location is adelaide and I am happy to post parts with e-go or aus post.

It was to be a time attack project so I was never worried about getting it rego'd but it can be done.

However it would still be an awsome track car as there are'nt many r34's doing time attack or even drift.

best contact is 0420 734 794 or pm me here. pics will up this weekend as i have camera issuse but i'll throw some temp ones up later tonight.

cheers, troy

Link to comment
https://www.sau.com.au/forums/topic/379855-for-sale-r34-gt-t-shell-and-bits/
Share on other sites
rb20-into-mr30= Collaborator

rb20-into-mr30=

Posted
  • Author
Posted (edited)

bump!!

also found a rear reo bar

and 1 complete r/h rear tail light

the other tail lights are only good for the coloured lens :thumbsup:

price drop to $1200 with free delivery within adelaide.

Edited by rb20-into-mr30=
  • 2 weeks later...
rb20-into-mr30= Collaborator

rb20-into-mr30=

Posted
  • Author
Posted (edited)

now with s14/r33 wheels and i have started fixing the r/hand head light section for replacement

and I have assembled the front and rear suspension so all springs and shocks are fitted and car is now steering and fully rolling on 4 wheels

also now advertising on gumtree and ebay :cheers:

Edited by rb20-into-mr30=

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...