Jump to content
SAU Community

For Sale ! R34 Gt-T Shell And Bits

rb20-into-mr30=
 Share

Recommended Posts

rb20-into-mr30= Collaborator

rb20-into-mr30=

Posted
Posted

hey guys and girls, I found a r32 gtr at a price i couldnt refuse so I regrettibly have to get rid of my r34 project.

it was to be a z-tune replica with an ls1 but I cant have 2 projects on the go.

so basiclly i have the r34 gtt shell and parts as follows:

1 spare drivers door

front hubs

2 front cross members

2 spare tail lights minus plastic garnish

front and rear suspension (std)

2 dash pads

there are no front or rear reo's or bumpers nor side skirts either.

the shell has rear drive train including the auto tailshaft, and every thing is there for the front I just need a few bolts to be able to put it back together.

It has a shopping trolley under the front to keep it rolling.

As for the shell itself, it was a repairable write off with minor damage on the front drivers headlight and a nasty

cut down the drivers side, hence the spare door(same colour) I was going to put gtr rear guards on to cover it up.

I would prefer to sell the whole lot( shell and parts) in one go for $1400 but if there is no interest in that I will happily part it out

at cost price or less. i bought all the parts and spares from fellow sau users real cheap so in return i'll sell them cheap.:cheers:

Location is adelaide and I am happy to post parts with e-go or aus post.

It was to be a time attack project so I was never worried about getting it rego'd but it can be done.

However it would still be an awsome track car as there are'nt many r34's doing time attack or even drift.

best contact is 0420 734 794 or pm me here. pics will up this weekend as i have camera issuse but i'll throw some temp ones up later tonight.

cheers, troy

Link to comment
https://www.sau.com.au/forums/topic/379855-for-sale-r34-gt-t-shell-and-bits/
Share on other sites
rb20-into-mr30= Collaborator

rb20-into-mr30=

Posted
  • Author
Posted (edited)

bump!!

also found a rear reo bar

and 1 complete r/h rear tail light

the other tail lights are only good for the coloured lens :thumbsup:

price drop to $1200 with free delivery within adelaide.

Edited by rb20-into-mr30=
  • 2 weeks later...
rb20-into-mr30= Collaborator

rb20-into-mr30=

Posted
  • Author
Posted (edited)

now with s14/r33 wheels and i have started fixing the r/hand head light section for replacement

and I have assembled the front and rear suspension so all springs and shocks are fitted and car is now steering and fully rolling on 4 wheels

also now advertising on gumtree and ebay :cheers:

Edited by rb20-into-mr30=

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...