Jump to content
SAU Community

Recommended Posts

Starting Point

2011-07-12%2B09.18.59.jpg

2011-07-12%2B09.19.11.jpg

2011-07-10%2B14.01.11.jpg

She looks heaps clean there, but she has been so abused it's not funny. There was a massive amount of camber in the front right, and we've managed to reduce it to around -4.6. Unfortunately, the left looks like it's on a massive angle too, i think. I don't look at the car heaps, she kind of sits at home ><

Anyways..

New Suspension

First things first; go lower, go harder. I thought it was running compressed stock springs because everything was squeaky and felt like shit. The body roll was a bit of a problem as well as it was causing a little bit of understeer.

Turns out it had king springs, so it was *too* bad... btu still, out with the old, in with the new. Pedders Extreme A coil-over suspension went straight on, and I was scraping out of blacktown pedders in no time.

281852_2129282986197_1069621960_2459571_2916645_n.jpg

Here's a picture of me tucking 17" rims.

It only rubbed when i hit the brakes going down a steep hill and i turned at the same time... so really it never rubbed. LIfe was good.

Brakes

The brakes were next on my list because the disks were warped and the thing stopped like shit.

I was going to fork out $1400 for slotted rotors all round and better pads from Pedders, but luckily they didn't have any in stock. That saved me heaps.

Because of this, I ran over to Skyline Spares and collected myself all the gear for a 5 stud conversion, giving my GTST brakes (upgraded to four pistons at the front, bigger rotors, bigger calipers).

I decided to do this myself because, like the topic title says, I wanted to learn more about the car.

I haven't got much photos, but after three weeks, lots of swearing, lots of head banging, and two split-pin screw things later... I FINALLY got it done.

Because it went so over time, I had to take it to a mechanic to get him to bleed the brakes, because I jsut don't get time to do it with work and such, and I needed the car within a couple days after completing.

The brakes need a rebleed, i'll be doing that soon. I'll get a mate to help me in exchange for helping change his rotors :)

Here's the finished product, with the BBS rims I bought from Skyline Spares.

2011-09-17%2B14.54.09.jpg

Why the stockies on the rear?

Like a true p-plater, I decided to go take this thing out sliding... Turns out the rear diff is f**ked and it's doing onesies... meaning drifting can only be done in the wet... Sigh.

Oh, and yes, i did this off public roads.

You can also see from the above pic how tucked the front wheels are.. it's not too much but because the tyres are a lot thicker than my last pair, they're scrubbing a whole lot.

I'm going to roll the guards up when I get a chance.. just need to borrow my mates jack again... :(

And it's not pack up time at work.. So I'll update the thread tomorrow when I'm back at work :)

Link to comment
https://www.sau.com.au/forums/topic/380001-p-platers-learner-car-33-gts/
Share on other sites

My mate has driven EF and AU falcons with open diffs and can get them sideways in the dry. He is crazy though, just reefs on the wheel at 80+ then countersteers, lol.... Nice little project man, wish I had an import on my P's. I get my opens in December though, so there's time for that ;)

My mate has driven EF and AU falcons with open diffs and can get them sideways in the dry. He is crazy though, just reefs on the wheel at 80+ then countersteers, lol.... Nice little project man, wish I had an import on my P's. I get my opens in December though, so there's time for that ;)

The falcons go sideways alright.. my gfs cousin had one with a locked diff and it went sideways on command. Problem with my liner is it's only peg-legging atm, so when I try to drift in the dry the bastard kinda squats and you can hear the power going to the diff, and stopping at the diff (thats what it sounds like anyway).

that's the next thing to hit on my list (right after I fix up the sub in the rear, and get the new fusion speakers in... oh and save the 2k i need for a frekaing diff -.-)

And trust me, you don't want an import car on your Ps. Crap fuel consumption, combined with no power and bad rep from cops... no real point until you're on your fulls. In a way, I wish I sold my old pristine N/A R33, kept my African American (black r32 gtst) and just played with that... ahh well.

Good luck with your fulls... You must be feeling so anxious now it's so close :P

Gonna try photodump when I have the time :) Got some cool shots.

Nice to see someone else on there green ps waste money on there skyline like im doing haha makes me not feel as stupid hahaha how much you pick up the 5 stud conversion at..... Sucks about your diff thank god mines lsd

  • 4 months later...

Haha not the only one mate, i seem to be throwing money at the 34 at the moment haha.

Nice to see someone else on there green ps waste money on there skyline like im doing haha makes me not feel as stupid hahaha how much you pick up the 5 stud conversion at..... Sucks about your diff thank god mines lsd

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...