Jump to content
SAU Community

Recommended Posts

my stageas engine light comes on and the car hesitates and runs rough between 1000-2000rpm. today it got really bad and the revs started dropping and then picking up again a lot before finally stalling. i did a diagnostic check on it by bridging the 2 connections on the diagnostic port and i got code 55 - all cear. WTF.

ive cleaned the AFM, swapped the coils, replaced the sparks, cleaned the AAC valve and filled up with 98 premium

the previous owner put an aftermarket exhaust on it and has cut the connection to the o2 sensor after the cat (there isnt a sensor to plug it into). the rest of the car is bog stock. not even a pod filter

Link to comment
https://www.sau.com.au/forums/topic/380215-engine-light-on/
Share on other sites

thanks dudes. i found the posts on how to fix it. nicely soldered up now :)

Is it fixed now??? I have a spare unit that needs soldering so want to know if it worked for you???

Link to comment
https://www.sau.com.au/forums/topic/380215-engine-light-on/#findComment-6070970
Share on other sites

not getting any more AFM fault codes but the car is far from fixed. still doing the weird stalling thing between 1-2rpm but i went to japanese parts n performance in molendinar and got another AFM just to make sure. same shit happening between 1-2rpm

so to answer your question; i THINK it fixed the AFM..... :S

Link to comment
https://www.sau.com.au/forums/topic/380215-engine-light-on/#findComment-6073662
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mainly being afraid of breaking something on something i've poured so much money into haha
    • Hey   ive gone for a terminated harness on my build so selling brand new unused and unopened piggy back harness  https://www.haltech.com/product/ht-141357-elite-2000-2500-nissan-skyline-r32-33-r34-gt-r/ Located Bathurst NSW   price $600 + postage     
    • The trigger kit I have is similar to the one in the link below. While going through Facebook, I saw someone else mention a similar issue, and I’m starting to think this could be related to the crank gear itself. I understand these parts are CNC machined, but maybe some earlier versions or individual pieces might have slight inconsistencies—it just doesn’t look right in my case. https://www.facebook.com/share/16an8evZd9/?mibextid=wwXIfr I originally installed the crank gear using the thin OEM washer, but as shown in the attached photo, the timing belt walks very close to the edge. When I tried using a Nitto washer—which is thicker—it actually made the issue worse. The belt walks about 1mm off the front edge, which raises more concern about alignment.   I’ve gone through the full process of elimination:   The tensioner pulley and bolt are brand new and installed correctly. The bolt isn’t bent and is oriented properly. The back of the tensioner and the idler pulley are clean and seated correctly. The idler sits slightly more forward, which I understand is due to its design. I’ve experimented with both tight and loose belt tension, but it makes no difference. As soon as the engine runs, the belt immediately walks forward again—even if I reset it beforehand.     At this point, I’m considering replacing the crank gear with your Race Version 1 (12-tooth), but before purchasing, I wanted to ask:   Are you aware of any alignment issues when using this gear? Would this gear help keep the belt aligned correctly, or could the walking still occur? Does it work with a standard missing-tooth crank and rear washer? Is there any specific crank setup or install procedure required?     For reference, I’m not using a front washer, as the PRP crank gear seems to replace the need for one.   Looking forward to your advice.
    • Yep, looks that way. Never driven an E30 or R31 so I can only imagine  
×
×
  • Create New...