Jump to content
SAU Community

Recommended Posts

I can smell fuel near the right rear tire after a drive when the car is parked, I know it's close to the fuel cap, surprisingly there is no petrol smell near the cap, it's more from the tire section of the car. is this normal?

Thanks

Normal? No, Common? Yes.

It is the charcoal canister overflowing and spewing out the smell of fuel it was meant to trap. Stupid environmental regulations which demand you trap the smells coming from the fuel tank whilst you are outdoors, only to release them back into the atmosphere in the privacy of your own garage.down.gif

I have it too. I previously had the same issue in a Mercedes E55 AMG and they replaced the canister twice, the fuel lines and the fuel tank at $000's and still didn't fix it.

I am not holding my breath and expecting Nissan to be as generous (reckless) with their Factory Warranty budget...

Edited by GT-Ricer
Link to comment
https://www.sau.com.au/forums/topic/380239-fuel-smell/#findComment-6075027
Share on other sites

wregardless of car, this is incorrect. see to it. make nissan fix it before its to old and they blame it on some shit.

alll cars since forever (mid 80's) have a charcoal canister,

if you can smell it. its evaporating and wasting your money...fine in a really old car, that's part of the character.

Link to comment
https://www.sau.com.au/forums/topic/380239-fuel-smell/#findComment-6083982
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...