Jump to content
SAU Community

Recommended Posts

So far making 270rwkw on 15psi spiking to 16. Got all supporting mods wanted to push for 18 or 20psi

Any reasons i wouldnt be able to. I.e. Afr's?

R33-rb25

Last tune by jeff speedlab, cant find himso recomendations on where to get a good tune would be good.

Cheersguys

Link to comment
https://www.sau.com.au/forums/topic/380428-basic-retune-for-more-psi270rwkw/
Share on other sites

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

What turbo you running? Is the motor built with cams etc? Thats a good power at 15psi! My car has 270rwkw with bout 21psi on a stock motor with a GTX3071 if your fuel system is up to it 20 psi is no drama!

Put it this way mate my car has 850cc injectors and tomei 276Lpm pump and my boost spiked up to 26.6psi in 3rd gear with plenty of revs and throttle and the motor didnt make a sound it shouldnt of!:thumbsup:

But obviously i wouldnt recommend it on a stock motor! But alot of blokes in here run 20psi on stockas reliably if ya motor is relatively healthy and you dont abuse it too often :whistling:

No ideaonthe turbo but according to previous owner was biggest highflow. Done by ATS

Stock internals as far as i know, no cams or camgears, fuel systemis easly up to it.

Im

Not sure whats good for that turbo but mabye look at a retune orgionaly this car made 236rwkw on 16psi from turbo tune, then jeff gave it a real tune.

SWEET! Well wind the boost up mate and put her back on the rollers! haha :banana:

Wow thats a big increase from a re tune! Good luck with it mate :thumbsup:

No ideaonthe turbo but according to previous owner was biggest highflow. Done by ATS

Stock internals as far as i know, no cams or camgears, fuel systemis easly up to it.

Im

Not sure whats good for that turbo but mabye look at a retune orgionaly this car made 236rwkw on 16psi from turbo tune, then jeff gave it a real tune.

ATS, would be GT30 internals in a factory t3 housing machined to fit. Most power you will get out of it is 270-280kw before its out of its range and starts surging or going hyper (aka, spinning n making more boost with no power increase, much like a non actuated turbo) The factory front housing doesnt like boost over 18psi, have seen em crack before but then again have seen em running on 20+ with no problem. Either way i wouldnt push it, if its still healthy, get rid of it and upgrade to something that will handle the power you want with ease.

my 2c

18psi from an ATS highflow would just be starting to reach the happy zone. I have an ATS "highflow" of sorts, with a GT3076R ball bearing internal wastegate core - front is a stock compressor cover ported out to the extreme, rear exhaust housing is a .73ar AVO unit for the 6-bolt skyline style.

Bill Keen from ATS builds his turbos to take up to around 22psi comfortably, 18psi would be nice and sweet for an unopened motor.

Make sure your fueling is ok, same with cooling. But with 270rwkw currently Id say that probably isnt an issue. At 18psi you could expect 280rwkw, at 20psi perhaps up to 300rwkw.

I use and recommend Bootworx, however Willal Racing is a SAU:SA club sponsor and Martin Donnan would have to be the best tuner in the state.

sorry to burst your kw bubble but i would almost certainly put money on it that 270kw was a happy dyno

Bill rates that high flow to 270,

first thing first go see Martin at >>Willall Racing<< and get a power run and advice on if he can improve the tune or extract more boost

sorry to burst your kw bubble but i would almost certainly put money on it that 270kw was a happy dyno

Bill rates that high flow to 270,

first thing first go see Martin at >>Willall Racing<< and get a power run and advice on if he can improve the tune or extract more boost

Hey I'm with you

rb25 15psi for 270 is high

Run it on the mainline dyno @ Willal for a more realistic readout

As Steve said. Best thing to do would be to take it to Willall. Get them to do a power run and then look into getting more boost, better tune and see what it spits out. 270rwkw on 15psi would certainly not be coming out of a highflow.

Cheers for the imput guys. Il give willall racing a ring next few days n see how much it is.

Yea even i figured it was a bit much non the less put a massive smile on my face on boost ;)

Just a quick thing the highflow was 2700. Wouldnt it have been better to just get a 3076r or something? I know for the whole stock look its good but this thing is clearly defectable catch can, bov all that crap

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...