Jump to content
SAU Community

Indicators / Corner Flashers - R32 Gtst

Dr Tuning
 Share

Recommended Posts

Dr Tuning Collaborator

Dr Tuning

Posted
Posted

Hey, am selling these front corner indicators which came off one of my Skylines ( R32 GTST ).. They are the original JDM clear ones that were $350 back in the day, NOT THE UGLY EBAY ONES!

Unfortunatly they have Faded from the sunlight, so there for i would recommend either having them Tinted black or using them for a Drifter!! The lights themselves are in more or less Immaculate condition in the sense of cracks or broken bits, they have none what so ever with all the Locator pins, Tabs & mounts in perfect condition!! Hard to find in this condition, just sucks about the Faded clear which is now Yellow!

Pickup is from Sydneys west or i can post Auswide at your expense... $60 :thumbsup:

94379396.th.jpg

Uploaded with ImageShack.us

38927625.th.jpg

Uploaded with ImageShack.us

78211268g.th.jpg

Uploaded with ImageShack.us

Link to comment
https://www.sau.com.au/forums/topic/381675-indicators-corner-flashers-r32-gtst/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...