Jump to content
SAU Community

Manual Conversion

pwiince
 Share

Recommended Posts

pwiince Explorer

pwiince

Posted
Posted

hey guys

Im new to this forum, so apologies in advance if i posted this in the wrong section.

ive got a r34 gt auto/triptonic gearbox.

when i start to drive my car takes off in third then goes to neutral.

first, second and fourth are gone.

reverse is fine.

sometimes it works fine but as soon as i break and come to a complete stop the same thing happens again.

im really considering of doing a manual conversion.

but if anyone knows what wrongs with it, i wana fix it then sell it and get a manual one.

if its cheaper that way.

Link to comment
https://www.sau.com.au/forums/topic/381912-manual-conversion/
Share on other sites
mad082 Grand Master

mad082

Posted
Posted

probably cheaper to either get the gearbox fixed (depending on what the problem is), or replace it with another auto box. manual conversion may be cheaper than fixing it if it is stuffed, but will be more expensive than a second hand auto.

as for diagnosing the problem, best of taking it to an auto transmission workshop.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...