Jump to content
SAU Community

Recommended Posts

Hi guys

I've got some mostly S15 stuff to sell. Everything came off a JDM Manual turbo car.

Stuff is in good condition unless otherwise stated.

Pics can be seen here.

https://picasaweb.go...feat=directlink

Im located in Baulkham Hills 2153, Sydney NSW

All prices are FIRM.

Intresting Stuff

----------------------

1. S15 Front Seats. A little tiny bit of fading on drivers side, but no tears or rips. Comes with rails as well. $300

2. S15 Rear seats. Good condition, no rips or tears, but have been sitting in the shed for a while, so need a wash. $50

3. 4 x S15 480cc injectors. $200

4. S15 Greedy Thermostat block adaptor thing. Has Dash 10 fittings for an oil cooler. $100

5. Just Jap Recaro copy seat. Drivers side. Perfect condition, has never been used. Its red. $100

6. D1 Spec Just Jap oil catch can. I bought it about 3 years ago, but I've never used it. Its still in its original box. $30

7. Honda Integra DC2R carbon fiber rear lip. It can be made to fit S15 front bumper with some heatgun goodness and some bending, but it sits really low, so i dont want to install it. $100

8. S15 Sandwitch plate for oil filter. Has 2 sensor fittings. $20

9. S15 Exedy Heavy Duty clutch. Comes with stock dual mass flywheel, and all bolts. Its got heaps of meat left. Its been barely used. $150

10. S15 Exedy Brass button clutch with heavy-as-hell pressure plate and stock dual mass flywheel. The clutch is worn, and it all has been sitting around for about 1 year, so theres surface rust everywhere. $50

11. Earls Oil filter relocation block. It has Dash 10 fittings, and the hread suits a 3/4" oil filter. It has no sensor ports. $20

S15 Boring Stuff

---------------------

1. S15 stock rear camber arms - $30

2. S15 stock rear toe arms - $30

3. S15 stock tie rods - $50

4. S15 stock tie rod ends - $50

5. S15 stock castor rods. I think the bushings are gone. $20

6. S15 stock Xenon light modules. Come with the bulbs as well. $40

7. S15 stock BOV. Comes with the mounting bracket as well.

8. S15 rear hubs. One of the hubs is missing 3 bolt studs. Nissan sell these for about $7 new. $150

9. S15 tailshafts. The longer one has the thread a bit screwed cause i smashed it with a hammer when i took it out of the hub. Its not that bad, but it does need a bit of fixing. $50

10. S15 Engine and gearbox mounts. Have around 120,000kms on them, so a bit worn, but not broken. $20 EACH

11. S15 Front shock mounts. The bushings are pretty screwed. $20

12.S15 Washer bottle - $20

13. S15 Intake cam gear. $20

14. S15 RHS only front lower control arm. $15

15. S15 RHS only TEIN castor rod. $50

I have a bent/broken LHS castor rod and TEIN control arm as well, but theyre really bent. You can have them for free if you want.

16. S15 Fuel pump. $50

17. S15 gearbox shifter rubber boot thing. $10

18. S15 front LHS seatbelt

19. S15 interior trim panels. $20 EACH. Look at the pics to see which ones there are.

Skyline Stuff

-----------------

1. R33 Rear bumper bar. It has been sanded down back to plastic about 75%. $20

2. Sparco (I think) drivers side seat rail for Skyline. Its bottom mount, similar to the bride ones. It came off a sparco seat. I dont know what else will fit on it. $50

3. R34 GT Non-turbo wheels. I think specs are 16x6.5" with +40 offset. All tyres are shagged. $150

4. ECR33 S2 Front grille. Silver. All clips are there. $20

Edited by Goosy

Oops, some mistakes in the first post

S15 BOV should be $50

And I dont have the intake cam gear (aka the VCT thing). Its actually the camshaft itself.

  • 2 weeks later...

Hey mate you don't happen to have a stock JDM S15 ECU by any chance do you? Shoot me a PM

Edited by ryu1605
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • haha don't worry I'm sue you've got more fun ahead buying a 30 year old turbo car....but at least you are in the right place to ask
    • some days eh? The keyless entry and interior light on/off with the key will be controlled by the Body Control Module, but I'm not certain where that is or what it looks like (you might get lucky with a search to get a part#, which could be printed on it). I'd start at the A pillar/ Under dash/kick panel on the driver's side
    • It might be hit and miss, but Nissan Genuine Parts and Pitworks are not the same thing, although both are available from Nissan Dealers with Nissan Part Numbers. Nissan Genuine Parts are the OEM stuff, Pitworks are their attempt to get people back from generic parts makers
    • I did end up getting it sorted, as GTSBoy said, there was a corroded connection and wire that needed to be replaced. I ended up taking out the light assembly, giving everything a good clean and re-soldered the old joints, and it came out good.
    • Wow, thanks for your help guys 🙏. I really appreciate it. Thanks @Rezz, if i fail finding any new or used, full or partial set of original Stage carpets i will come back to you for sure 😉 Explenation is right there, i just missed it 🤦‍♂️. Thanks for pointing out. @soviet_merlin in the meantime, I received a reply from nengun, and i quote: "Thanks for your message and interest in Nengun. KG4900 is for the full set of floor mats, while KG4911 is only the Driver's Floor Mat. FR, RH means Front Right Hand Side. All the Full Set options are now discontinued. However, the Driver's Floor Mat options are still available according to the latest information available to us. We do not know what the differences would be, but if you only want the one mat, we can certainly see what we can find out for you". Interesting. It seems they still have some "new old stock" that Duncan mentioned 🤔. I wonder if they can provide any photos......And i also just realized that amayama have G4900 sets. I'm tempted too. 
×
×
  • Create New...