Jump to content
SAU Community

Recommended Posts

Its really my fault, I never submitted the leave request. I thought I did, I submitted like five all at once for exams and a wedding, but apparently not for DECA. Even though I had spoken to my manager several times about having this weekend off, but when I actually saw my hours it was too late to change/replace them. No one wants to work a Saturday.

On the plus side I always spend a stupid amount of money at DECA which can now be put towards the 180 fund.

We are a bit late on this but Kat and I will be there.

Kats turn to drive something and I will volunteer so put me wherever - I will need some guidance on what I need to do though as never done one of these.

Am I able to reg as a driver as well and have one or two blasts here or there? No crashes I promise :P

We are a bit late on this but Kat and I will be there.

Kats turn to drive something and I will volunteer so put me wherever - I will need some guidance on what I need to do though as never done one of these.

Am I able to reg as a driver as well and have one or two blasts here or there? No crashes I promise :P

Cheers.

I will find you a spot. its not brain surgery so you will be fine. Be there for the breifing and we will word you up.

As for having a blast here and there that would be a no.

Unless you enter and have your CAMS or AASA licence have your car ready and pay all fees.

See you guys up there

Cheers.

I will find you a spot. its not brain surgery so you will be fine. Be there for the breifing and we will word you up.

As for having a blast here and there that would be a no.

Unless you enter and have your CAMS or AASA licence have your car ready and pay all fees.

Awesome!

Yep sorry I meant if we are both entered as drivers, but we only have the one car. We have our CAMS licences etc and doing the forms / payment now.

Yes Paul you can both enter and drive the car. The team will space your numbers so once the first driver has their turn you should be at the start of the pack again for the second driver.

The days are pretty cruisey so you wont have any issues.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
×
×
  • Create New...