Jump to content
SAU Community

Recommended Posts

All for sale as I have bought a Haltek and Racepack dash, some of these were in my shed and taking up space as well

First off we have a Defi Link set:

80 mm boost(new) $200

80 mm tacho(used) $200

60 mm oil pressure(used)$250

60 mm oil temp(used)$200

60 mm water temp(used)$200

Defi Link thing number 2(used)$100

Warning meter (new) $50

IMG_0790.jpg

Oil temp and pressure come with mount so you can just bolt it on (fits gtr and rb30)

Water temp comes with a mount to plug straight into a gtr

All sensors and an extra 2m link wire included as well

Condition is all good

Obviously I want to keep it all together and sell as a job lot as that easier so if you want the whole lot pm me and we can work out a deal, otherwise i shall separate them

Next up is a Greddy meter set, all used, off my old Zed

They are all silver in colour

60 mm oil pressure $150

60 mm boost pressure $150

60 mm water temp $150

60 mm oil temp $150

IMG_0787.jpg

IMG_0788.jpg

All sensors and wires included

Once again cheaper if you buy the lot

Next one is a Greddy kit in white, all used

60 mm exhaust temp with new sensor $200 (sensor cost more than that alone)

60 mm boost temp used $150

IMG_0786.jpg

Apexi boost gauge, heckit

60mm 30 bux(currently starts at 0,5bar)

IMG_0785.jpg

But wait there is more(how awesome in 5 years of hoarding!

80 mm pivot boost gauge $50

IMG_0789.jpg

and now for the steak knives...

I have 5 x 60 mm Jetspeed EGT sensors(new)

$50 each.. these things are awesome!

IMG_0784.jpg

and an old school Apexi air flow controller $40

IMG_0791.jpg

All located Lower Blue Mountains, Sydney NSW

Pick up or postage at buyer's expense

Pete

0448468884

Link to comment
https://www.sau.com.au/forums/topic/382898-guages-defi-greedy-pivot-ect/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Keen on the 80mm boost gauge and link. How much shipped to SA 5114?

And just incase I change my mind, how much for the full Greddy set shipped?

Keen on the 80mm boost gauge and link. How much shipped to SA 5114?

And just incase I change my mind, how much for the full Greddy set shipped?

Looking to keep the defi set complete, but I can do $520 posted for the silver faced Greddy set of four gauges

:)

Call it $500 flat and you got a deal... I've been on the 31 club too long, keeping the lowball alive and well. Ha.

Shoot me payment details and I'll swing some cash your way.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What Duncan said sounds right. Also, it looks like they only have the driver's mat. Not the rest. Because looking at the diagram: KG4911 is just the mat for the driver. KG4900 is the full set if I'm not mistaken and discontinued.   But, it looks like they may still have the full set for the manual S2. Might be worth checking for the other models as well as they seem slightly different. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/misc/G49 Man, I'm tempted.
    • I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
×
×
  • Create New...