Jump to content
SAU Community

Help

reeceo21

By reeceo21,
in General Maintenance

 Share

Recommended Posts

reeceo21 Community Regular

reeceo21

Posted
Posted

Hey fellas I have a set of sparco wheels and need a special lug for them. Here is the link of the only place that will do them that i can find

http://www.galproeng.com.au/specifications.html

Its the third table down and its the "e" one. They want 8 bucks for one and then include shipping on to that. i only need 7 but not really willing to pay that for a piece of metal that size, if any one has any others that will fit or know were to buy give us a message on 0459302735. need them pretty urgently and i dont always have access to the computer.

Cheers Reece

Link to comment
https://www.sau.com.au/forums/topic/382991-help/
Share on other sites
tridentt150v Grand Master

tridentt150v

Posted
Posted

Eh, 70 bucks isn't too bad. Imagine paying 300 a set for Rays wheel nuts...

And spares are sooooo handy! I've gone through so many wheel nuts in the time I've owned my car ermm.gif

ha ha yr supposed to do them up with a wheel brace - not just finger tight!!! :action-smiley-069:

Link to comment
https://www.sau.com.au/forums/topic/382991-help/#findComment-6113799
Share on other sites
Hanaldo Grand Master

Hanaldo

Posted
Posted (edited)

ha ha yr supposed to do them up with a wheel brace - not just finger tight!!! :action-smiley-069:

Ohhhhhh, I seeeee. I was just throwing them at the studs like darts and hoping for the best teehee.gif

Edited by Hanaldo
Link to comment
https://www.sau.com.au/forums/topic/382991-help/#findComment-6114009
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...