Jump to content
SAU Community

Recommended Posts

Evening all,

I have a problem with my R34 GT-T where the TCS Off and SLIP lights are lit on occasions. The time between starting the motor and the lights coming on is varies, sometimes a couple of minutes, other times it may be an hour or more.

Restarting the motor will turn those lights off for a random period again.

My totally random guess is that its a sensor somewhere playing silly buggers (hope its not the PFC). Does that seem like a reasonable?

If so, where and what should I look for?

Is there anything I can do myself to see if I can fix it like clean sensors, or remove sensor wiring plugs and clean, check sensor cables for visable damage?

Failing all that, who should I take the car to for this to be fixed? Nissan dealer, auto electrician or skyline specialist?

Link to comment
https://www.sau.com.au/forums/topic/383152-r34-warning-lights-tcs-off-slip/
Share on other sites

  • 10 months later...

super common problem, as Dan said, 99% likely to be coilpacks

does the car sound different when the lights come on? sound like a WRX?

i'm guessing coilpacks, and if that's the case get Splitfires, don't waste your time with yellow jackets etc.

Just need someone to do a consult check of the error codes. But really, you're probably better off replacing the coilpacks as you'll probably have to do them sooner or later :P

super common problem, as Dan said, 99% likely to be coilpacks

does the car sound different when the lights come on? sound like a WRX?

i'm guessing coilpacks, and if that's the case get Splitfires, don't waste your time with yellow jackets etc.

Just need someone to do a consult check of the error codes. But really, you're probably better off replacing the coilpacks as you'll probably have to do them sooner or later :P

Dont be fooled its not always coil packs seems the tcs is failing on a lot of R34 GTT in the past few months , mine did the tcs and tps packed it in a week later , splitfire coil packs didnt fail till the next month lol no better then all the rest didnt even get 3 yrs out of them barely driven , i swapped out my throttle body for another off a wrecked car and it fixed my tcs slip light it will also chuck up abs light when it fails , the codes didnt match the problem indicated , once a new used body was installed and battery reset it was fixed except for tweaking the tps for my car - nistune

It also disables the car when it fails no more then 2,000 rpm redline is available and that sucks bad

Edited by Carbon 34
  • 1 month later...

I may have had the same issue earlier in the year. the lights kept recurring for months!

I looked up everywhere trying to figure out what was wrong and heaps of people said it was related to the coilpacks. I took it to a tuner to let them figure it out and it turns out my coilpacks were fine (in fact, they were still in very good condition).

they said it was the throttle body, so they replaced it but the lights still came on!

after a 3 weeks of them looking at it (yes, i kept taking it back because they said they "may" have fixed it even though it wasn't), they said it turned out to be that the ecu pins had been all bent up and therefore wasn't establishing a good connection. i don't know if it's true or not, but i haven't had any issues for more than half a year now.

I hope that helps.

jay

I may have had the same issue earlier in the year. the lights kept recurring for months!

I looked up everywhere trying to figure out what was wrong and heaps of people said it was related to the coilpacks. I took it to a tuner to let them figure it out and it turns out my coilpacks were fine (in fact, they were still in very good condition).

they said it was the throttle body, so they replaced it but the lights still came on!

after a 3 weeks of them looking at it (yes, i kept taking it back because they said they "may" have fixed it even though it wasn't), they said it turned out to be that the ecu pins had been all bent up and therefore wasn't establishing a good connection. i don't know if it's true or not, but i haven't had any issues for more than half a year now.

I hope that helps.

jay

Your welcome people need new coilpacks on old cars but that isnt aways the fix!

Your error lights wont go off unless battery disconnected and ecu reset , after throttle body fix

Pins bent on ecu doubt that highly unless it was monkey'd with , most likely the plug pins in front of intake manifold , thermostat area these corrode bad so sometimes its that simple to sort out

Pretty safe to say this is a serious annoying common defect on gtt with all the failures lately

That's why you do the diagnostic, takes literally 30 seconds and you know EXACTLY what has gone wrong, instead of all this guessing bullshit. Every single computer in the R34's has a diagnostic function, all will give you the answer depending on what sub-system or sensor/actuator has failed.

I had the TCS stepper motor fail also, never limited the car in any way though.....maybe your butterfly was stuck down, making the car feel gutless?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...