Jump to content
SAU Community

Recommended Posts

Had a drama with the paint that was done on the front bar by the Repair shop as the paint wasn't a good colour match so they did it again.

So finally got it done due to rain holding it back and then got my front numberplate finally put in its final resting place:)

201203161424331200x9001332331977.png

201203161424451200x9001332331977.png

So time came to sort out my Clutch Master as it really wasn't loving life. Was going to cost $120 to recondition my current one or $140 for a new one of which the Boss of the Clutch shop divulged was actually a brand new Clutch Master for a D22 Navara because his son had done an RB25DET conversion on his Navara and he noticed they were the same one. This information relating to the fact most parts for Imports aren't listed, As is the case with a part number for an R33 Clutch master Cylinder. So what do i do? I hit up a mate at a 4X4 wrecking yard for a second hand D22 Navara Clutch Master Cylinder. Got myself a 2010 D22 Navara Clutch Master Cylinder with only 8000KM on it for $35 LOL.

Just had to change over the rod and hey presto :D

D22 Master is the clean one obviously.

201203161133551200x9001332331305.png

201203161135441200x9001332331305.png

201203161322461200x9001332331305.png

All done.

201203161350161200x9001332331305.png

Got a random photo of my Impul Swaybar :)

201203170908471200x9001332332212.png

Time came to get my front Calipers painted and front Rotors Machined(Slightly warped). Took it into my mates workshop and he sorted it out :)

201203170910451200x9001332332212.png

Someone chose the absolute worst colour of blue to paint the Calipers and Rotors lol.

201203170915561200x9001332332212.png

201203170922051200x9001332332212.png

Onto the Rotor Machine.

201203170927511200x9001332332212.png

201203170930191200x9001332332722.png

And add Silver paint midway ;)

201203170952381200x9001332332722.png

Finished product :)

201203171016031200x9001332332722.png

Ugly.

201203171010251200x9001332332722.png

They call it "Real Red" for a reason aha.

201203171011451200x9001332332871.png

201203171015131200x9001332332871.png

Mate used a Gasket remover to take the paint off the Nissan.

201203171022171200x9001332332871.png

Caliper bolts get Silver Paint for the added touch.

201203171022451200x9001332332871.png

Clips get the Metho treatment.

201203171038181200x9001332333205.png

Finished Product.

201203171119231200x9001332333205.png

201203171131301200x9001332333205.png

So at this Juncture i state that i will hopefully be getting the rear Rotors and Calipers Painted this week along with Royal Purple going in my engine and then that's its for a long time. Karratha calls for me.

Cheers to everyone that appreciates this thread and Vehicle.

This build is the fruits of me and my best mates efforts :)

None of this could have been done without the Help,Work,effort,knowledge,Car-space,Equipment and time put in by Jarod. Cheer-Bro :cheers:

Have a good one people. :):thanks:

  • Replies 84
  • Created
  • Last Reply

Top Posters In This Topic

Looking really good mate, amazing how well it all comes together when small things like that are done. Keep it up!

Cheers dude! The time will come soon for you to get back into the game ;)

Looks awesome mate.

Welcome to WA in advance :P

Thank you kind Sir :P

looks pretty good now, gerry will never get another import! He'll turn into a vn driving redneck with 3 odd hubcaps and trying to swap broken fish tanks for skid wheels and police chips lol

Sorry dude, i don't live in Beenleigh anymore lol Plus my commodore driving days are long gone now!

I'll get another import, but, considering i live in a unit the size of a shoe box and have no garage, im in no real rush to be getting anything. But im really really starting to dig 4 door 33's. Might be looking into something like this at the of the year, if all else goes to plan that is lol So until then ill stay up till the late hours of the night looking at other peoples money pits lol

Edited by Gerry Giraffe
  • 4 weeks later...

Rain held back getting the rears done but finally got round to it.

201203252202471200x9001334487698.png

201203252214001200x9001334487698.png

Custom painting equipment aha

201203252213481200x9001334487698.png

201203252214131200x9001334487698.png

Nissan emblem not sanded down as yet but will be done some day.

201203252246171200x9001334487869.png

201203271546431200x9001334487907.png

And here is my final photos.

201203270719501200x9001334487907.png

201203270719381200x9001334487869.png

201203270718531200x9001334487869.png

201203270718001200x9001334487869.png

201203271927491200x9001334487907.png

Edited by 045HOW

Soooooooooooooooooooooooooooooooooooooooooooooooooooooo i sorta never posted my trip to the dyno for a tune. Total woops on my part.

201202040758041200x9001334495943.png

201202040833471200x9001334495944.png

201202040849401200x9001334495944.png

201202040854331200x9001334495944.png

201202040904491200x3501334495976.png

201202041049181200x9001334495976.png

PFC picked up an intermittent random problem with my CAS in the higher range which halted the tune being pushed any further. realistic figure of 174rwkw on 12.5psi on a hot day with a CAS problem.

Tune is quite linear compared to the stock R33 tune. Feels more like a stock R34 tune but still a bit more fun to drive.

Will need to get a new CAS in the future and get some sort of Re-tune (As to whether it will be a bit of a tinker or a full retune is unknown)

  • 4 weeks later...

Love your work mate. Looks unreal a little known fella here on the goldy luke fink has one forsale I think his was the first I've ever seen then stumbled across yours love the gunmetal grey looks great with the impul swaybars and all the other stuff would you say it handles better than a normal 4 door? I'm not going to buy a 2 door ever again love the 4 doors truley converted hehe.

Love your work mate. Looks unreal a little known fella here on the goldy luke fink has one forsale I think his was the first I've ever seen then stumbled across yours love the gunmetal grey looks great with the impul swaybars and all the other stuff would you say it handles better than a normal 4 door? I'm not going to buy a 2 door ever again love the 4 doors truley converted hehe.

4 door has a 20mm larger rear overhang same wheelbase and same underbody setup as a 2 door. Handles exactly the same as a 2door.

4 door has a 20mm larger rear overhang same wheelbase and same underbody setup as a 2 door. Handles exactly the same as a 2door.

I disagree. I have owned 2 4 doors and 1 2 door. 2 door seems more snappy and unpredictable when you cut loose whereas 4 door seems easier to control. Weight is in different areas and 4 door is heavier along with shape of roof and height and whatever. My lowered 4 door still had a higher roof than my 2 door on stock suspension.

nice work here mate, the BN SPORTS front was a good choice!

You live in karratha? Im guessing the car is over east still?

From Hedland thats all. Keep it up :thumbsup:

Thanks :)

Yeah mate living in Karratha. Impul is over east. Will give it some time and maybe get a respray and a new crank angle sensor then prob get it trained to Perth and then bring it up.

Right now im rocking out with a 3k AU Falcon lol.

You drive yours much? around these parts?

Around hedland mainly on weekends, i use the maloo for longer trips. Bit more comfortable :P

Got another mate here who also owns a bcnr33. Not many good examples of imports around here, its all HSV

Fair Fair

Theres a fairly clean white 32 4 door in town along with a lebspec autosalon style orange 300zx then theres a really dirty MK4 Supra with kit rims bonnet wing all terribly fitted,cracked and dirty lol.

Feeling pretty keen to get crank angle sensor,condenser,retune, respray and bring mine over near the end of the year :P

  • 1 month later...

Around hedland mainly on weekends, i use the maloo for longer trips. Bit more comfortable :P

Got another mate here who also owns a bcnr33. Not many good examples of imports around here, its all HSV

Was that you driving towards the LIA in Karratha at about 7 minutes past 3 today (Friday)?

Saw it briefly going the other way but my first split second glance was "GTR!" aha. Looks awesome. If it wasnt you would it have been your mate?

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Could be. Could also be that they sit around broken more. To be fair, you almost never see one driving around. I see more R chassis GTRs than the Renault ones.
    • Yeah. Nah. This is why I said My bold for my double emphasis. We're not talking about cars tuned to the edge of det here. We're talking about normal cars. Flame propagation speed and the amount of energy required to ignite the fuel are not significant factors when running at 1500-4000 rpm, and medium to light loads, like nearly every car on the road (except twin cab utes which are driven at 6k and 100% load all the time). There is no shortage of ignition energy available in any petrol engine. If there was, we'd all be in deep shit. The calorific value, on a volume basis, is significantly different, between 98 and 91, and that turns up immediately in consumption numbers. You can see the signal easily if you control for the other variables well enough, and/or collect enough stats. As to not seeing any benefit - we had a couple of EF and EL Falcons in the company fleet back in the late 90s and early 2000s. The EEC IV ECU in those things was particularly good at adding in timing as soon as knock headroom improved, which typically came from putting in some 95 or 98. The responsiveness and power improved noticeably, and the fuel consumption dropped considerably, just from going to 95. Less delta from there to 98 - almost not noticeable, compared to the big differences seen between 91 and 95. Way back in the day, when supermarkets first started selling fuel from their own stations, I did thousands of km in FNQ in a small Toyota. I can't remember if it was a Starlet or an early Yaris. Anyway - the supermarket servos were bringing in cheap fuel from Indonesia, and the other servos were still using locally refined gear. The fuel consumption was typically at least 5%, often as much as 8% worse on the Indo shit, presumably because they had a lot more oxygenated component in the brew, and were probably barely meeting the octane spec. Around the same time or maybe a bit later (like 25 years ago), I could tell the difference between Shell 98 and BP 98, and typically preferred to only use Shell then because the Skyline ran so much better on it. Years later I found the realtionship between them had swapped, as a consequence of yet more refinery closures. So I've only used BP 98 since. Although, I must say that I could not fault the odd tank of United 98 that I've run. It's probably the same stuff. It is also very important to remember that these findings are often dependent on region. With most of the refineries in Oz now dead, there's less variability in local stuff, and he majority of our fuels are not even refined here any more anyway. It probably depends more on which SE Asian refinery is currently cheapest to operate.
    • You don't have an R34 service manual for the body do you? Have found plenty for the engine and drivetrain but nothing else
    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
×
×
  • Create New...