Jump to content
SAU Community

Recommended Posts

Hey I got a puzzeling question..

I took my bros r33 for a spin the other day .. and as i went around around a corner with a bit of speed, water came out of somewhere and poured onto my left foot..

closer inspection showed it was possibly coming from a pipe angeling at your feet..

anyone know whats goin on here?

Link to comment
https://www.sau.com.au/forums/topic/38334-wet-feet/
Share on other sites

This is probably the same thing that we have with our pintara (r31 he he he)...

Aircon - Leaves (or whatever) get stuck in there, blocking flow of air i think and water condenses and comes out when you go around a corner (depending on the setup of the car). In our car, it's on the passenger side and will pour out when taking a right turn (so that the force acting on the water is to the left). Flush the leaves out :D

I'll have the exact reasons tomorrow when my dads back... unless someone else knows.

Link to comment
https://www.sau.com.au/forums/topic/38334-wet-feet/#findComment-775579
Share on other sites

You've been driving through a river?? :thumbsup:

Common problem in the skylines.. Anyhow, this is the solution. In the FAQ section there is a full guide to fixing the problem and photos, etc. Its a roughly 5 hour job to fix, and yep, it does need to be fixed.

http://www.skylinesaustralia.com/forums/sh...76&page=1&pp=25

The alternative is to bypass your heater completely via just plumbing it back into itself in the engine bay and skipping replacing the core for the time being. I wrote how to do that somewhere else too...

25GTT - not necessarily. Mine was a bit intermitent, then started getting worse and worse till it was doing it all the time. Of course the less you use your heater system (and in the R32/R33 skylines its kind of a balance between the heater and aircon at any one point for any degree you dial in) the less likely you're going to get the problem. Just keep a very close eye on your coolant levels, especially on hot days. Never know, always possible that some gunk has jammed in the hole, preventing it leaking :D

Link to comment
https://www.sau.com.au/forums/topic/38334-wet-feet/#findComment-777981
Share on other sites

man i dunno what the dela is here

some people say it takes 5 hours to fix the others say its 10 minutues..

ill take the car for a loop and see what comes out.. i thik its too do with the air con .. as im pretty sure its just water .. however its a fair bit of water..

so how do i fix that?

Link to comment
https://www.sau.com.au/forums/topic/38334-wet-feet/#findComment-778111
Share on other sites

Mindflux -

Well it took the bloke i went too 10 mins to fix. Everytime i turned sharply on the righthand side my left shoe was covered in water :thumbsup:, was quite funny actually untill my old man drove my car and said it was a condensor or something arather pipe that has come out. It isn't a big deal but it does get very annoying.

I have an R33 GTR and you also have the same model so i doubt the air con pipes would be different or anything..

Good luck shouldn't cost you much anyway..

Link to comment
https://www.sau.com.au/forums/topic/38334-wet-feet/#findComment-778141
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...