Jump to content
SAU Community

Hose Heat Protection

Hanaldo

By Hanaldo,
in Western Australia

 Share

Recommended Posts

t_revz Grand Master

t_revz

Posted
Posted

i think 200 from memory. the whole reason we used it was for was for protection from exhaust leaks on the big dump trucks so the harness wasnt totally screwed. we used the large red firesleeve on the main harnesses where the diameter was big enough. but those trucks going up the ramps has constant egt`s of 600-750C for up to an hour solid so would be a hotter engine bay than yours. but the further you can keep it from turbo and exhaust the better :thumbsup:

will try scout around for part number and price on the black one next couple days :cheers:

t_revz Grand Master

t_revz

Posted
Posted

sorry its taken so long Martin.

yellow sleeve. CAT part no 9X-1386. 4c per cm. comes in 7.5m roll but can be cut off to length. internal diameter 6.81mm

black sleeve. CAT part no 9X-1813. 4c per cm. comes in 3m roll but can be cut off to length. internal diameter 7.62mm

havent had a chance yet to find temp rating.

Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted

Got your PM thumbsup.gif

No worries at all man, wasn't in a rush and you've been a massive help :D Mate works at CAT and looked up the part number you gave me, turns out they have 5km of the black stuff in Guildford mellow.gif Wil probably be about enough...

t_revz Grand Master

t_revz

Posted
Posted

I hope he looked up the right stuff then unsure.gif

well if he is right you should be able to get 4.9km for free as they dont even know they have it. :bunny:

but the max quantity the store keeps is only double figures not sure where 5km came from :wacko:

  • 2 weeks later...
Fry_33 Proficient

Fry_33

Posted
Posted

Most Hydraulic hose companies will have fire/heat sleeve. Try places like Hardy Spicer, Southcott or Hydraulink. Most of them will carry the red stuff as this is the main colour used in the hydraulic industry (Red = hot I suppose)

However, I just saw recently that Speedflow is carrying a black version, here, page 30 :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...