Jump to content
SAU Community

Car Won't Start After Putting Back Together

Mangune

By Mangune,
in General Maintenance

 Share

Recommended Posts

Mangune Mentor

Mangune

Posted
Posted

Hey , so I had a crash. Rooted the cas and front end. So I replaced the cas, then started the car and moved it up the driveway (on a slight hill) car was pulled apart (front end) last sat. And has been re assembled to a point where only thing that is missing is head lights the themo fan and air con unit is in but do t think hooked up.

So I go to start the car and won't start it just turns over but nothing. I though maybe cos on hill so I rolled it out and nose down hill noe. But still won't start.

Idk what can it be. Battery has been out so I don't kno how this effects the ecu and I have a safc2 .

Help woul be much appreciated :)

Mangune Mentor

Mangune

Posted
  • Author
Posted

It turns over but has no guts. Would a week battery still make everything turn on but not enough to start it?

Also on my vault gauge it sits about 11-12 like normal when on ignition but when I try and start it now it drops to 8-9 surely that can't be right, I never looked when starting the car before.

PM-R33 Grand Master

PM-R33

Posted
Posted

You sure it is in the correct location though? If the CAS is out, it won't kick over.

To test. While some one is cranking over the car, rotate the CAS a little bit to see if it starts to fire.

mr031 Contributor

mr031

Posted
Posted

unbolt the cas, plug it in and spin it by hand, you should hear the injectors pulse and fuel pump turn on, quick way to check to see if your cas/wiring is working, I always do this on my wiring test bench for conversions, tho use a noid light in-place of injectors.

Mangune Mentor

Mangune

Posted
  • Author
Posted

unbolt the cas, plug it in and spin it by hand, you should hear the injectors pulse and fuel pump turn on, quick way to check to see if your cas/wiring is working, I always do this on my wiring test bench for conversions, tho use a noid light in-place of injectors.

Yer I have done that and you can them click, and can hear fuel pump in rear also.

Tried jump start. No good maybe didn't wait long enough was about 5-10 though a positive was on the gauge the vaults went up to 12-13 not 10-11 and when trying to start only went to 10-11 but I'll go get more fuel and occupy that idea.

How do you mean pull the cas out and had turn it while someone I starting the car? Like pull it right out and turn the stem whilst someone is trying to start it?

tridentt150v Grand Master

tridentt150v

Posted
Posted

Nah, he means loosen it and slowly swivel it in its adjustment slots while someone cranks the motor over. If it fires up in a certain position then that means you had the setting wrong. You'd still have to fine tune it though to get it exact. Then lock it off and your good to go.

Mangune Mentor

Mangune

Posted
  • Author
Posted

Still having problems, engine cranks over but won't fire?? Is there a standard immobilizer that will stop it firing? I've rotated cas while tried starting and nothing . Taken cas out and rotated and can hear the injectors clicking.

What has me is that before the front end was pulled apart and I only just replaced the cas with a new one it fired straight away. Then now radiator and supports has been replaced it won't be nice. Like I said only thing missing out is head lights and thermo fan. Even tried putting headlights on and starting. Put more fuel in and nothing also.

Is there a immobilizer or something that has to be reset I have a safc2 and a turbo timer but I dont kno how this would effect it??

Can something to do with spark just pack and not work??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      Torana Lx Gtr Hatch, Lots Of Pictures

      By The Bogan · Posted

      LOL, when one "money pit" is never enough Noice, and excellent work mate
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • MBS206
      NC MX5

      By MBS206 · Posted

      I hear that would involve some nice country road drives into the hills for Mark...
    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
×
×
  • Create New...