Jump to content
SAU Community

Recommended Posts

gerald79 - unless its had an engine transplant to a shittier engine, its not a 1993. Can you please update your thread to have the correct details.

It has been check by importers that it is a nissan silvia 1993, the engine was there as this is not the first nissan silvia S13 to have this engine in OZ. They come in different series as well. I also just got a imported book about this issue and it has stated in the book that they do have nissan silvia S13 with this type of engine in them when they will made.

Not trying to be rude but it is not a wrong year and anyone who wants to buy it can also have it check by an importer.

My mate is the one selling his car and i find that it is very cruel to say that the car suxs and all that. If you are interested than reply if not leave yr comments to yrself. You wouldnt want someone to say the same thing that you said when you are selling yr car out right. We are all mature ppl so i hope that we all could understand how my mate feel.

It isnt his fault that it was imported in this way as there are a lot of other nissan silvia S13 with that same engine and it is also not a wrong year. They even have a japanese imported book that carify this issue. It is stated that they are also other series of NIssan Silvia S13.

Tks for understanding and if you want the name of the japanese book ragthering this issue, feel free to PM me and i would give you the title so you would be able to know more about it as i just got to know more about it since my mate wanted to sell his car.

Cheers...

Link to comment
https://www.sau.com.au/forums/topic/38418-1993-silvia-s13/#findComment-782579
Share on other sites

Hi Gerald,

I think you may have misconstrued what Dave is trying to say.

He, in no way was saying the car sux, only that if it was a 93 silvia it should have a sr20 engine. From my understanding post 91/92 silvias have sr20's and all others have ca18's, which appears to be the engine in this silvia.

So Gerald you are right to say that there are other silvia's that have this engine.

IMO it is well priced.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/38418-1993-silvia-s13/#findComment-782633
Share on other sites

Hi Gerald,

I think you may have misconstrued what Dave is trying to say.

He, in no way was saying the car sux, only that if it was a 93 silvia it should have a sr20 engine. From my understanding post 91/92 silvias have sr20's and all others have ca18's, which appears to be the engine in this silvia.

So Gerald you are right to say that there are other silvia's that have this engine.

IMO it is well priced.  

Cheers.

i wasnt saying dave. i was just trying to tell others not to throw comments on it. Sorry for the misunderstanding. In the japanese import book they do state that in 1993 there are still cars with the ca18's engine.

Anyway the car has been sold.

cheers...

Link to comment
https://www.sau.com.au/forums/topic/38418-1993-silvia-s13/#findComment-783168
Share on other sites

shanet - i will close this thread now.... but becuase the compliance plate says its a 1993 doesnt mean jack.. i have seen skylines with NIZMO R33 on their plates... its just what the compliance company originally registered for complaince as.... I suggest you get the VIN code checked to be 100% sure.

Link to comment
https://www.sau.com.au/forums/topic/38418-1993-silvia-s13/#findComment-785177
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...