Jump to content
SAU Community

Recommended Posts

i have for sale my 3000klm old 3582r turbo.

It has damage to turbine side of turbo.

Turbo still works, was working right up until removal (change of engine internals). still feels as good as my new one i just got.

Comes with brand new housings and a 1.06 rear housing.

Located in Bundaberg 4670

Chasing $700 or best offer.

NOTE: does not come with the fittings in the CHRA showen in photos

will post at buyers expense.

Contact via post on thread, PM

photos:

IMAG0197-2.jpg

IMAG0196.jpg

IMAG0195.jpg

IMAG0185.jpg

damage to rear wheel

IMAG0193-1.jpg

New vs old (ad is for one on right)

IMAG0191-1.jpg

front wheel is like brand new

IMAG0190.jpg

the cover that came off the turbo to show it didnt touch the front housing

IMAG0187-1.jpg

Video of turbo to show it still spins free

th_VIDEO0039.jpg

Edited by nick81xd
Link to comment
https://www.sau.com.au/forums/topic/384212-garrett-gt3582r-damaged/
Share on other sites

$700 is steep... I had the exact same turbo with the same problem but not as bad. To get it fixed was a pain in the arse and wallet. I recon if you are a little flexible on the price, this will go quick.

  • 1 month later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...