OS Giken Flwheel bolt Torque specs??

[Bl4cK32]

Anybody know the torque specs for an OS Giken Twin plate flywheel to go onto crank??

Ive searched, and only found 120 FtlB?? (foot/pounds)

Does this sound right?

[rev210]

yes thats pretty tight.

I think the ogura flywheel on the Rb25 was 115ftlbs

[Bl4cK32]

cheers man. How did u stop motor turning over?

Its sitting like in my Avatar atm, I got someone to put a socket/bar on the bolt in the front pulley.

[rev210]

You can't really stop it alltogether but, at a certain angle you are able to tighten the bolts a little part turn at a time, takes a while . Putting a socket and bar on the front pulley is good too but, make sure you check the front pulley torque setting after.

[Bl4cK32]

So with the pressure plate bolts (tin allen key ones), do I tighten them up + 1/4 turn with loctite?

Is this enough coz i cant torque those ones.

cheers

[rev210]

tighten the hell out of them, they are normally high tensile steel bolts and don't break easy (the allen key will tho'). I don't use loctite on that sort of thing, however if you'd like to be sure go ahead.

[wreckedhead]

my mate tightened my os giken twin plate flywheel with the air gun and tightened the hell out of them.