Jump to content
SAU Community

Recommended Posts

Hy guys i have alot of things that now just has to go

Big things i will not sned but pickup is available

in s.e suburbs melb

r33 auto gear box nothing wrong with it and it has done 130xxx $90 bucks

R33 manual box All looks good inside just 3rd gear selector clip has broken

easy fix for some people but i just dont have the tools :) $280

r33 fenders s1 Rig and left not dints or anything but a little bit of paint fade $30 bucks a side

r33 rear bumper Std and in white small scratches could do with a tutch up $35

R33 oem clutch looks like it still has HEAPS left on it CHEAP!!! $25

R33 Tail lights in ok nick $40 bucks for BOTH

R33 s2 rear pods One has a crack in it that has been glued up ( needs paint) $ 25

5 x 114.3 20mm spacers comes with nuts $80 for the pair

S14 Boot with 2 with wing Bit of paint fade on it $30

s14 drvers door without buttons bit of paint fade but somes with motor $40

and glass and all that

Sr20 Exshaust manifold Stainless steel gave me and extra 10kw's ONLY $80

intercoolers ------

Sr20 Trust straight though inter cooler a oldie but a GOODIE comes with $270

piping and silicone

Sr20 Greedy Return style cooler ( comes with piping $250

Hybrid intercooler ( no piping ) $80

Sr20 Std injectors from a s14 only done 110xxx $60

i can get photo's by request otherwise when i have time some will be up on here

0430106414

[email protected]

ok guys things are going fast

Manuel box GONE

tail lights GONE

Fender's Waiting to be picked up

and hese some pics

Return flo ( greddy ) and the straight thorough ( trust ) coolers Both come with all piping and silicone hoses

post-63394-0-04786000-1323650936_thumb.jpg post-63394-0-43597000-1323650941_thumb.jpg

post-63394-0-37466100-1323650948_thumb.jpgpost-63394-0-60030900-1323651044_thumb.jpg

I also have this exhaust tip only ever used to test once does give off that pig pipe noise and i only WANT 75 bucks for it

post-63394-0-76707800-1323651301_thumb.jpg

  • 2 weeks later...

Pipes are 470 cm an the whole thing is about 10 cm longer

hey mate are you sure the pipes it self are 470cm thats way too long mate. 10cm the whole things is this right??/

just want to change my cannon tips to that pipes

Edited by Dbeast

Hers pics of spacers

post-63394-0-25054300-1325560169_thumb.jpg

( And you are Quite right i had a small typo what i ment to say is 450mm not cm )

That one in the photo is smaller aswell

But i d have these ones i have posted a pic of the size along with a pic of the pipes

And here is an example of what i mean about the size

post-63394-0-38834200-1325560128_thumb.jpg

post-63394-0-99588900-1325560389_thumb.jpg

Edited by Abe2

smoe one rabbed that up within 2 days :) but i can stick a flange on the back of one of these though :) these tend to look and sound alot better also :)

sold the other one so cheap because

it was the first one i ever made

smoe one rabbed that up within 2 days :) but i can stick a flange on the back of one of these though :) these tend to look and sound alot better also :)

sold the other one so cheap because

it was the first one i ever made

still the same prize $75??? with the flange thats fit r34 gtt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...