Jump to content
SAU Community

Recommended Posts

Found this on a local forum today. Figured I should post it up.

Quote "So my time almost came to an end this morning... im very lucky to be alive.

First of all, GO HUG YOUR WIFE/HUBBY and tell them you love them.

i had an acetylene bottle in my truck, the valve was bumped so slightly and over night the truck filled with the gas. i noticed the smell, and opened the doors to air out the truck. i drove the truck out of the garage to get some more air movement. i went to roll the pass side window down and as soon as i touched the power windows. BAM. with me in the truck. i lost all hearing out of my right ear and got a scratch on the back of my head. all things considering, im alive.

so now ive got the question out to toyota about a 2012 TT. 125 to canada only, 15 in standard. i want a standard...

pictures tell 1000 words.

dont take any minutes or seconds you have for granted... it may be your last...

peace everyone,"

And on to the pic's:

img_0110.jpg

img_0111.jpg

img_0112.jpg

img0171iq.jpg

img0175oy.jpg

img0184mm.jpg

img5424d.jpg

Link to comment
https://www.sau.com.au/forums/topic/385194-this-got-sent-to-me/
Share on other sites

  • 2 weeks later...

Im supprised the guy even started the car. If it was me i would have pushed it out into the drive way then open every door and let it air out.

Case in point the poor plumber the other week in Melb i think. looked like a bomb took out his car.



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...