Upgrade Fuel Pump

[plaztikman]

Well ive got the new turbo, air filter, exhaust, nistune and boost control now im looking 4 the right fuel pump .

Is there a plug and play option to keep my install cheap ? Thanks look forward to the input .

[GTR_JOEY]

What power u chasing? And with what engine?

You need to elaborate mate.

If u do need to upgrade then I would say get a nismo in tank pump, bolts straight in and is good for 700 hp on an RB 26

[BigBoyDan]

I'm going to be putting Deatschwerks in shortly...

http://www.kudosmotorsports.com/catalog/deatschwerks-fuel-pump-intank-deatschwerks-dw301-300ltrhr-with-fitting-kit-p-1036.html

[OMY31T]

i have a walbro 255l/h in my r33 - hasnt failed me yet and im pushing just over 300rwkw. i will most likely throw one in my s2 c34 next yr when i start my rebuild.

[Mick_o]

Nismo or tomei do plug and play options but arent cheap! Speak to jesse streeter i got my tomei pump for $300 delivered i think. Dont go cheap on the fuel pump mate not worth it!

[leetom]

bosch 040 044's are probably the most popular replacement for nissans, with the 040 handling aprox 300kw,easy to install(just a little cutting and shutting of your cradle) not overly expensive,there's s/load of info on most skyline forums about them, happy searching and hope you get a good result.

[pipster11]

bosch 040 044's are probably the most popular replacement for nissans, with the 040 handling aprox 300kw,easy to install(just a little cutting and shutting of your cradle) not overly expensive,there's s/load of info on most skyline forums about them, happy searching and hope you get a good result.

No cradels on c34's they have a box on the bottom

Best bet is walbro or daetchworks

[plaztikman]

Thanks for information , is there any modification to fit the walbro or deatschworks pumps ?

[pipster11]

Don't think so, pretty sure they are the same size as the stock one

Just have to change the electrical plug

[QWK32]

Thanks for information , is there any modification to fit the walbro or deatschworks pumps ?

Walbros drop straight in, plug is the same. Although you may want to look at bypassing the stock fuel voltage setup.

I haven't seen the new deastchwerks ones, though I have been running a set of their injectors for a few years now and never had an issue. If the pumps are the same quality they would definately be worth looking into.