Jump to content
SAU Community

Recommended Posts

post-85004-0-53234900-1324699305_thumb.jpgpost-85004-0-53234900-1324699305_thumb.jpghey guys i am selling a fully built motor it was just finished as of yesterday from a very reputable engine builder.. i have ran out of cash to finish this project properly and to do anythin less would be a shame cause of its potential and the gear i have bought for it... i will post photos and the specs of this engine but it was built from the base of a 32 gtr rb26dett i will also be selling a PAR Straight Cut Dog box i have the specs on this box if interested i am after $6200 for the gearbox once again just finished the other day never been put in a car... i have a twin plate direct clutch for sale also brand new a t88 with a t51 wheel it in not sure on exact specs but ill also get those as there was big money spent on it to get it to respond the way it does.. i have a haltech platinum pro computer also new a billet intake pump with twin walbro 1000hp pump a Zeitronix ZT-3 wide band kit, Turbosmart fpr2000 with gauge...all these items are new and will be selling

Here are the specs of the motor and what was done to it

JE PISTONS DAT/NIS SKLN RB26DETT

MACHINE HEAD CAM CLEARACE

NISSAN RB26DETT TIMING BELT

ARP HEAD STUD KIT NISSAN RB26DETT

ARP Main stud kit

VRS SET NISSAN RB26DETT

GRIND 6 CYL CRANKSHAFT/ FIT COLLAR

BALANCE 6 CYL ENGINE

TUNNEL BORE 6 CYL BLOCK

BORE & HONE 6 CYL BLOCK

DECK 6 CYL BLOCK trail square

set tappets /shims

supply and fit oil pump collar

full port and flow cyl head

bronze guides

Carrillo CONROD NISSAN RB26 HJ-BEAM

CONV SET NISSAN RB26DETT

SUPERTECH VALVEGUIDE

SUPERTECH VALVE GUIDE

SUPERTECH DUAL VALVE SPRING KIT

SUPERTECH NISSAN RB26DET

SUPERTECH NISSAN RB26 EX VALVE

SUPERTECH VALVE LOCK NISS RB26

NITTO PUMP 1400

HI OCTANE SUMP EXTENSION .695

FAB OIL PAN

SHIMS x 24

STD NIISSAN RB30 CONROD BRG SET

STD RB26DETT INLINE 6 DOHC 4V TURB

Will be sad to see this go but dont have the money to finish this project properly

$14500 asking price for the motor anyone who has built one and knows these parts knows how much it costs to build one to handle over 1000hp

post-85004-0-29634300-1324699340_thumb.jpg

post-85004-0-68893300-1324699365_thumb.jpg

post-85004-0-16565900-1324699389_thumb.jpg

post-85004-0-60168500-1324699417_thumb.jpg

post-85004-0-70828700-1324699437_thumb.jpg

post-85004-0-55091900-1324699455_thumb.jpg

post-85004-0-26647200-1324699479_thumb.jpg

post-85004-0-07871400-1324699594_thumb.jpg

post-85004-0-98079200-1324699622_thumb.jpg

post-85004-0-67367800-1324699664_thumb.jpg

post-85004-0-84896200-1324699693_thumb.jpg

post-85004-0-28534400-1324699718_thumb.jpg

post-85004-0-01787700-1324699774_thumb.jpg

post-85004-0-76259500-1324699819_thumb.jpg

post-85004-0-22037700-1324699849_thumb.jpg

post-85004-0-57749100-1324699870_thumb.jpg

post-85004-0-68959500-1324699885_thumb.jpg

post-85004-0-43278900-1324699899_thumb.jpg

post-85004-0-61216900-1324699915_thumb.jpg

post-85004-0-19231100-1324699927_thumb.jpg

post-85004-0-80040700-1324699941_thumb.jpg

post-85004-0-85695400-1324699950_thumb.jpg

post-85004-0-50094500-1324699964_thumb.jpg

Edited by gtr_23qu
Link to comment
https://www.sau.com.au/forums/topic/386465-fully-built-engine/
Share on other sites

i wouldnt buy a par box to use as a paperweight, but the engine looks the goods mang, why not just hang onto it and come back to it at a later date?

Cause i didn't quite think of all the lil parts that was needed and they were the killer...to do anythin less with this engine would be a waste it was built big a strong to handle alot but the old story of the cash flow is a big factor in this unfortunately oh yea it has HKS Cams 264 aswell but gotta check

hi mate,

how much for the haltech platinam pro and does it come with loom.

i need it for my r33 gtst.

thanks

post-85004-0-53234900-1324699305_thumb.jpgpost-85004-0-53234900-1324699305_thumb.jpghey guys i am selling a fully built motor it was just finished as of yesterday from a very reputable engine builder.. i have ran out of cash to finish this project properly and to do anythin less would be a shame cause of its potential and the gear i have bought for it... i will post photos and the specs of this engine but it was built from the base of a 32 gtr rb26dett i will also be selling a PAR Straight Cut Dog box i have the specs on this box if interested i am after $6200 for the gearbox once again just finished the other day never been put in a car... i have a twin plate direct clutch for sale also brand new a t88 with a t51 wheel it in not sure on exact specs but ill also get those as there was big money spent on it to get it to respond the way it does.. i have a haltech platinum pro computer also new a billet intake pump with twin walbro 1000hp pump a Zeitronix ZT-3 wide band kit, Turbosmart fpr2000 with gauge...all these items are new and will be selling

Here are the specs of the motor and what was done to it

JE PISTONS DAT/NIS SKLN RB26DETT

MACHINE HEAD CAM CLEARACE

NISSAN RB26DETT TIMING BELT

ARP HEAD STUD KIT NISSAN RB26DETT

ARP Main stud kit

VRS SET NISSAN RB26DETT

GRIND 6 CYL CRANKSHAFT/ FIT COLLAR

BALANCE 6 CYL ENGINE

TUNNEL BORE 6 CYL BLOCK

BORE & HONE 6 CYL BLOCK

DECK 6 CYL BLOCK trail square

set tappets /shims

supply and fit oil pump collar

full port and flow cyl head

bronze guides

Carrillo CONROD NISSAN RB26 HJ-BEAM

CONV SET NISSAN RB26DETT

SUPERTECH VALVEGUIDE

SUPERTECH VALVE GUIDE

SUPERTECH DUAL VALVE SPRING KIT

SUPERTECH NISSAN RB26DET

SUPERTECH NISSAN RB26 EX VALVE

SUPERTECH VALVE LOCK NISS RB26

NITTO PUMP 1400

HI OCTANE SUMP EXTENSION .695

FAB OIL PAN

SHIMS x 24

STD NIISSAN RB30 CONROD BRG SET

STD RB26DETT INLINE 6 DOHC 4V TURB

Will be sad to see this go but dont have the money to finish this project properly

$14500 asking price for the motor anyone who has built one and knows these parts knows how much it costs to build one to handle over 1000hp

at what stage is this, ie is the head bolted on, does it have cams and the covers on etc.

if not does it have a head gasket and what is the comp ratio set at if the standard head gasket was to be used.

location ?

Pm sent

at what stage is this, ie is the head bolted on, does it have cams and the covers on etc.

if not does it have a head gasket and what is the comp ratio set at if the standard head gasket was to be used.

location ?

Pm Sent

  • 2 weeks later...
  • 1 month later...
  • 11 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...