Jump to content
SAU Community

Recommended Posts

hey mate i'm looking to convert my auto series 2 to manuel u said $200 for conversion.i'm willing to pay that..would you be able please list the items involved and what condition there are in?....cheers

conversion is no longer for sale

see post above for whats left

  • Replies 139
  • Created
  • Last Reply

Top Posters In This Topic

Righto, someone take this stupid passenger side door off my hands

50 bux pick up

IMG_1253.jpg

bargain as it's in top condition with glass etc, just missing the interior trim

or happy to butcher it for parts if anyone needs them... handle, side mirror, motor etc

  • 2 weeks later...

Side skirts and 5 zigen exhaust tip sold

Here's what's left:

-Rear cradle $100 for the whole thing including hubs and control arms (no brakes or diff, one bent control arm)

IMG_1170.jpg

….or can separate parts off it, see prices below

-Rear sway bar $50

-Rear upper and lower control arms $100 the lot

-Hubs $250 for fronts and rears

IMG_1246.jpg

-Rear wing $40 (excellent condition, no LED light, bargain)

IMG_1260.jpg

-Passenger door $80

-Passenger side mirror $20

IMG_1253.jpg

-Wiper stalk $15 (indicator stalk sold already)

IMG_1244.jpg

-Sony Xplod Stereo $40-Comes with remote control and manual

IMG_1186.jpg

-Passenger airbag $50 prefer pick up as I'm not sure how well it would go in post

IMG_1192.jpg

-Ignition barrel with key $50

IMG_1240.jpg

-Front & rear seatbelts $20 each or $50 for all four (no pic excellent condition)

-Climate control unit $30

IMG_1182.jpg

-B/C pillar trims $30 each or both for $50 (awesome condition)

IMG_1232.jpg

IMG_1231.jpg

-ABS unit $50

-ABS bracket $20 (or free if you buy the ABS unit)

IMG_1124.jpg

-Power steering rack $50

R33Gtststeeringrack.jpg

-Cat to muffler 3” exhaust pipe $40 pick up only

IMG_1238.jpg

Also got a heap of parts from an R33gtr I wrecked so ask away

Do you have all the bushings, bolts and brackets for mounting the sway bar? Especially the metal brackets that mount it to the chassis(they go round a rubber bushing to hold it steady)

I don't care about the bar, too much trouble to ship, but I'll give you 30 for everything else but the bar if you got all the pieces. Shipped to Perth?

Do you have all the bushings, bolts and brackets for mounting the sway bar? Especially the metal brackets that mount it to the chassis(they go round a rubber bushing to hold it steady)

I don't care about the bar, too much trouble to ship, but I'll give you 30 for everything else but the bar if you got all the pieces. Shipped to Perth?

i might do but fck knows where they are at this point, would be probably not worth the hour to find all the bits ;)

Now sold:

-Side skirts

-5Zigen tip

-Wilwood 4 piston Superlight front brakes

-Front lower control arms

Taking offers on most of this stuff so ask away, it's all that's left of the wreck....

-Rear cradle $100 for the whole thing including hubs and control arms (no brakes or diff, one bent control arm)

IMG_1170.jpg

….or can separate parts off it, see prices below

-Rear sway bar $50

-Rear upper and lower control arms $100 the lot

-Hubs $250 for fronts and rears

IMG_1246.jpg

-Rear wing $40 (excellent condition, no LED light, bargain)

IMG_1260.jpg

-Passenger door $70

-Passenger side mirror $20

IMG_1253.jpg

-Wiper stalk $15 (indicator stalk sold already)

IMG_1244.jpg

-Sony Xplod Stereo $40-Comes with remote control and manual

IMG_1186.jpg

-Passenger airbag $50 prefer pick up as I'm not sure how well it would go in post

IMG_1192.jpg

-Ignition barrel with key $50

IMG_1240.jpg

-Front & rear seatbelts $20 each or $50 for all four (no pic excellent condition)

-Climate control unit $30

IMG_1182.jpg

-B/C pillar trims $30 each or both for $50 (awesome condition)

IMG_1232.jpg

IMG_1231.jpg

-ABS unit $50

-ABS bracket $20 (or free if you buy the ABS unit)

IMG_1192.jpg

-Power steering rack $50

R33Gtststeeringrack.jpg

-Cat to muffler 3” exhaust pipe $40 pick up only

IMG_1238.jpg

Now sold:

-Front lower control arms

-Rear hubs and arms

Still for sale:

-Rear cradle $80

-Rear sway bar $50

-Hubs $100 front hubs- includes abs sensors and uprights but no lower control arms

-Rear wing $40 (excellent condition, no LED light, bargain)

-Passenger door $70

-Passenger side mirror $20

-Wiper stalk $15 (indicator stalk sold already)

-Sony Xplod Stereo $40-Comes with remote control and manual

-Passenger airbag $50 prefer pick up as I'm not sure how well it would go in post

-Ignition barrel with key $50

-Front & rear seatbelts $20 each or $50 for all four

-Climate control unit $30

-B/C pillar trims $30 each or both for $50 (awesome condition)

-ABS unit $50

-ABS bracket $20 (or free if you buy the ABS unit)

-Power steering rack $50

-Cat to muffler 3” exhaust pipe $40 pick up only

-'Gt' quarter panel badge $20 posted

Also got this other shit for sale:

-SAAS Steering wheel (no boss kit) $80

-Quick release boss kit $40

-SAAS gear knob $40 (as new condition)

-M's turbo timer $40

-Apexi 2” Power Meter gauge $60

-Speco Meter 2.5" tacho $50

-Racetech oil pressure gauge $50

Hey mate, I didn't sift through all 7 pages..

Just wondering if you have the sun sensor for the climate control, the one that sits on the passenger side of the dash. Apparently mine has died. :(

Hey mate, I didn't sift through all 7 pages..

Just wondering if you have the sun sensor for the climate control, the one that sits on the passenger side of the dash. Apparently mine has died. :(

nah dash is sold so that would have gone with it

i still have a 33 gtr dash floating around, not sure if it's the same but i might have one on that

  • 1 month later...

Hey mate,

PM sent earlier in the week about the power steering rack + if you had anything else left over from this car at this stage. Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...