Jump to content
SAU Community

Recommended Posts

doing a holaday clean out and putting everthing i find up for sale

iv striped a few 33s over the years so if its not listed i can look for it

parts are in storage in Colac but every weekend im driven back and forth to Ringwood

so if any body wants parts i can deliver on a sunday night or a friday arvo

or order the parts and pick up in ringwood 0400102360

striping a r33 s1 coupe any thing you guys need just ask im only keeping gear box and rearend

IMG_0258.jpg

IMG_0266.jpg

IMG_0264.jpg

rb20 head looks to be in good condition with inlet $150ono

IMG_0269.jpg

rb20 head bad condition snap belt $50

IMG_0268.jpg

r33 passenger side light

IMG_0267.jpg

r33 mirrors $20

IMG_0263.jpg

rb20 bottom end looks to be in good condition $100

IMG_0257.jpg

r34 na diff and axels make a offer on the stuff

IMG_0256.jpg

rb25de neo ecu

IMG_0270.jpg

stock 33 front pipe with cat $50

IMG_0262.jpg

jdm r32 cat $50

IMG_0260.jpg

r32 turbo air box $200

IMG_0261.jpg

r33 racks x3 $50 each

r33 x member $50

so much more ill keep adding need any thing just ask

thanks Matt

Edited by dreadr31

Just wondering if you have any other pics of the underside of the inlet manifold, im having problems with splitting hoses under there and have been trying to get a full pic of where everything goes under there.

nah havent got cooler bits

stuff that have sold

dash

doors

side windows

carpet

parts up date

2 33 gtst seats quick sale $50 for the per

IMG_0282.jpg

rb25det long motor not 100% sure on condition only idle it in car no noises no smoke

car had 66000ks on it, sat in a shed for 8 years after accident $800 firm

IMG_0285.jpg

IMG_0284.jpg

Edited by dreadr31

1DSC_0287Large.jpg

Is there a box on the dash that looks like that? did the car make a clunking noise for 10 seconds or so when you turn the ignition on?

if you have the box and does not make the noise how much posted to vic 3200.

Edited by W0rp3D

Cant tell from the pic but it looks like the box on top of the dash left of center with 2 wires running to the loom just under the windscreen.

Hi mate, will you ship the bracket that the bonnet latch and horns are attached to from the r33 gtst, to perth 6155? If so how much you want for it?

post-88026-0-34081400-1325512595_thumb.jpg

Hi mate, will you ship the bracket that the bonnet latch and horns are attached to from the r33 gtst, to perth 6155? If so how much you want for it?

post-88026-0-34081400-1325512595_thumb.jpg

pm sent

AFM how much ship to darwin NT millner 0810 what BOV you got in there????

i got a spear afm got to wait till we finsh a car first to see if we need it

keen on the drivers side mirror do you have it still ?

yerp

  • 2 weeks later...

Hi mate,

I will take the following pieces;

- the plastic dash piece which covers the whole day (basically the big plastic piece right under the front window and the side control panel arms with window switches.

How much?

Hi mate,

I will take the following pieces;

- the plastic dash piece which covers the whole day (basically the big plastic piece right under the front window and the side control panel arms with window switches.

- Upper side door plastic trim (the area where people usually mount side gauges).

How much?

post-38197-0-11867900-1326689052_thumb.jpg

post-38197-0-54566200-1326689407_thumb.jpg

Hi mate,

i would be interested in the rear boot trim and board if you still have it?

Let me know and give me a perice, and how much for shipping to perth.

all gone sorry man

Pm sent

replyed

Hi mate,

I will take the following pieces;

- the plastic dash piece which covers the whole day (basically the big plastic piece right under the front window and the side control panel arms with window switches.

How much?

window switches have gone

dash pice it ok small crack under the cluster

  • 4 weeks later...

i am now stripping down the motor if any one needs parts

turbo sold

also people can low ball me on the rb20 parts haha

Edited by dreadr31

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...