Jump to content
SAU Community

Recommended Posts

I'm currently experiencing some issues with my R33 GTR V-Spec.

I will try to explain as best I can the issues I'm having and I apologise for the size of this post. Please only post constructive comments.

The Problem:

I keep getting the air bag LED and ABS LED in the dash coming on after about 15 minutes of driving. (Air Bag LED constantly flashes, ABS LED is solid) They only light up when the car is in gear, and turn off when in neutral position. This is regardless of what speed I'm doing. So it seems to be related to the driveline being in motion. This doesn't bother me too much, but what does bother me is the burning smell that follows coming from the boot region. The cabin of the car fills with a chocking smell, making it hard to breath. I don't believe this is an electrical smell. It is an indescribable smell, possibly an oil burning.

2nd Problem:

HICAS system. I have just installed a nismo dash and found that someone had removed the HICAS warning lamp from the original dash cluster. So on the nismo unit the HICAS LED is on at all times. I have done no further diagnosis on this. (Could be related, could be seperate issue.)

Background:

I have owned this car for 5 months, and believe it is a very stock unit, with the only modification being an exhaust . I attended a skidpan day, where I removed the front drive shaft and drove reasonably hard. The Monday after this event my GRID dash dancer (Electronic torque split controller) arrived from Japan and was installed, by RevZone. When I first drove the car after the initial install, The Active LSD and 4WD light in the dash came on. I drove the car at 10km down the street and it felt like the hand brake was on. (the car didn't want to move) I turned the car off and on again and the lights were gone. This has not happened since.

I have found the GRID unit diagram translated into English, and re-connected (soldered) the wiring myself. I have also removed the dash dancer from the vehicle and found that the problem didn't disappear, but only happened twice in two following weeks of driving. So the problem is reduced when the GRID Dash Dancer is removed, but it's not the source of the problem. The Dash Dancer it's self appears to be working in normal (disabled/ off) and rear wheel drive mode, but 50/50 split isn't working.

I have had another mechanic check and bleed my hydraulic lines, in case there was any problem there.

I have purchased and installed redline oils for both front/ rear LSD's, Gearbox and Transfer Case. When removing the oil from the transfer case I found a spring loaded washer stuck to the sump magnet. (May or may not be related)

Any help would be most appreciated. Especially from someone with similar issues.

Any recomendations on mechanics that would know about driveline problems in GTR?

Thanks, Chris. (Scotsman)

Link to comment
https://www.sau.com.au/forums/topic/38680-r33-gtr-driveline-issues/
Share on other sites

Nah I don't think the smell I'm getting is brakes. It fills the cabin only and cant be smelt from outside the vehicle (I know what burning brakes smell like) The smell originates from the inside the boot.

leaking hydraulic fluid onto something hot like the exhaust and you can smell the fluid burning on exhaust from inside the cabin/boot area? that would also somewhat expain your hicas /abs lights coming as the system is leaking fluid and could be malfunctioing?

park it on some clean concrete or road and fang up and down a bit, any drips etc??

sorry if this doesn't help, just picking stuff out of mid air

there was another thread where someone had changed the steering in a gtr without the proper hicas boss kit and after 15 minutes or 10 minutes the hicas system would think there is a malfunction and bring on the warning light cos it could not sense the steering motion.

maybe search and see if there's a match somewhere there

I second the motion for a problem caused by after market steering wheel fitment. If you have one and the incorrect boss kit is fitted it will cause problems. Your HICAS light will come on due to sensor confusion in the steering column. It causes the hicas to shutdown and the fault light comes on. Pretty hard to see if it is or isn't working on the street... (being sensible of course.. eh eh)

Further, if your lights seem to come on intermittently try doing this: turn on everything you can and load up the electrical system and see what happens. Air con/ demissters stereo lights the works.

I've seen instances (on an r33 vspec) where due to a grounding problem the 4wd system will drop out when the electrical system is heavily loaded. When put on the r32 consult computer at Nissan it pointed toward the TPS having a fault but it ended up being a grounding issue.

If you've ever had an engine out or you suspect that its been out it might be worth checking to make sure there's no problems with grounding.

Remember the wiring harness is almost twice as thick as an r32 for a number of reasons so using the Nissan R32 consult computer system test will only check about half or so of the circuits. Its not the gospel test but it is very useful to help troubleshoot problems.

It sounds to me like you have a few seperate problems that are causing confusion.

Good luck with it.

Sebaz

2nd Problem:

 

HICAS system.  I have just installed a nismo dash and found that someone had removed the HICAS warning lamp from the original dash cluster.  So on the nismo unit the HICAS LED is on at all times.  I have done no further diagnosis on this. (Could be related, could be seperate issue.)

Background:

 

Thanks, Chris. (Scotsman)

Chris I put a Nismo cluster in my car today and have also found the same thing as you. Please let me know if you have yours fixed as yet coz that light is already giving me the shits after 10 mins

Regards Alan

Maybe someone has removed or played around with the HICAS unit and havn't put it back together again properly.

I would doudt that you would have a stock car, it may have come to you seeming stock, but it doesn't mean the owner before you hasn't done anything.

I've read/know some people that do up their cars and when they sell them they rip out all the parts and put all the old parts back in and then sell the car.

HICAS switched on after thrashing the shit out of it... and only when i thrashed it for about 10 minutes straight.. not letting it rest.. i took it to JSV for a service and the next thing i noticed it never appeard again.. just call them up and ask to speak to julian.. hes a good bloke ..

let me know how you go with the grid danser.. i don't feel comfortable leaving mine on 50/50 either, it feels like the drivetrain is twisting.. 0/100 seems to work well enough though (apart from the odd 4wd light error coming on after a few attempts at traction loss)

i had some very bizarre occurances with the grid danser when i accidently wired it the wrong way around, might be worth a check (i have instructions in the FAQ/tutorial section)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
×
×
  • Create New...