Jump to content
SAU Community

Recommended Posts

Hi Guys , sorry for the delay , just got home from Tassy.

VIC STATE CRUISE is ON!

22nd Jan is the date , two weeks away , just before Aust Day, UPPER Yarra Dam is the location , There will be TWO assembly points . 1st Mick will be at Monash Uni off Wellington Rd meeting time 10.00 am for a 10.30 departure and will LEAD the group and travel via the same route as the cancelled Lilydale lake cruise but continue on through Lilydale and turn right at Maroondah Highway and then right into Warburton Hwy , then onto Jarra Junction (approx 28km).

Second Assembly point will be approx 800mtrs through Yarra Junction on your left (plenty of room to park) where the Western suburb guys can meet with Adam and Myself if they wish, that will get us to the dam somewhere aruond 1.00/1.30pm , bring your own everthing BBQ`s are on site.

PLEASE REMEMBER THAT WE ARE USING PUBLIC ROADS ,HOONING,SPEEDING WILL BE FROWNED ON AND WE ARE THERE TO HAVE A GOOD DA Y,

Does anyone know how to contact the "V" guys it will be greatly appreciated.

Any Questions . Dennis.

P.S. I will do a map any update the post.

Link to comment
https://www.sau.com.au/forums/topic/387666-vic-state-cruise/
Share on other sites

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

coparts - I'm assuming the second meeting point (for the westsiders) is the car park at Yarra Junction Reserve??? and what would be the best time to meet (best case senario according to Google Maps is around 12ish)..

Is anyone bring Walkie Talkies??

Sorry to throw some rocks on your road...but are you sure about the route?was checking it through Google (long story short ,the miss has problems with mountain roads so I checked first...)in your second map you are following the yarra river course ...don't know just asking,Thanks.

post-52922-0-88785800-1326699337_thumb.jpg

post-52922-0-40540500-1326699347_thumb.jpg

post-52922-0-30691000-1326699358_thumb.jpg

11.30 / 12.00 sounds good to me ,area no 2 as mentioned is approx 800 meters through Yarra Junction on your left (it is the old highway before the realignment ) and yes most of the route follows the river and winds up through the hills to the Dam, bitumen road is good as we traversed it in the opposite direction the last cruise

Hi Guys , sorry for the delay , just got home from Tassy.

VIC STATE CRUISE is ON!

22nd Jan is the date , two weeks away , just before Aust Day, UPPER Yarra Dam is the location , There will be TWO assembly points . 1st Mick will be at Monash Uni off Wellington Rd meeting time 10.00 am for a 10.30 departure and will LEAD the group and travel via the same route as the cancelled Lilydale lake cruise but continue on through Lilydale and turn right at Maroondah Highway and then right into Warburton Hwy , then onto Jarra Junction (approx 28km).

Second Assembly point will be approx 800mtrs through Yarra Junction on your left (plenty of room to park) where the Western suburb guys can meet with Adam and Myself if they wish, that will get us to the dam somewhere aruond 1.00/1.30pm , bring your own everthing BBQ`s are on site.

PLEASE REMEMBER THAT WE ARE USING PUBLIC ROADS ,HOONING,SPEEDING WILL BE FROWNED ON AND WE ARE THERE TO HAVE A GOOD DA Y,

Does anyone know how to contact the "V" guys it will be greatly appreciated.

Any Questions . Dennis.

P.S. I will do a map any update the post.

What time do you guys anticipate arrival and departure of second meet point? I'm hoping to join you guys there. Actually thinking of selling my V36 Coupe and buying a Stagea!

Chris

I might meet you guys at Lilydale.

Anyone else from the North/North East want to meet me somewhere then hook up with the main bunch @ Lilydale?

Well, my Mrs has just informed me that she won't be out that long in the morning and she's booked us in to look at a couple of cars for her early Sat morning so I'll probably lob at the meet point and shuffle off with everyone but at some stage zig when you guys zag and head home.

So, who's heading to Monash from the north/north east?

well you can meet up with me at maccas bell street if you want

It's a bit of a shizen place to get to, but it'll be early on Saturday so traffic should be pretty light.

I'll meet you there at 9am.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...