Jump to content
SAU Community

Recommended Posts

G'Day guys,

Going to start fabricating my 4" exhaust tomorrow for my GTR, but i reckon im going to need roughly 1m of pipe to get me from the rear diff to the cannon at the back, would prefer stainless to go with the rest of the system but mild would get me out of trouble, willing to pay whatever its worth, or beer.

Contact via here or SMS me on 0408 117 171,

Cheers,

Daniel.

Link to comment
https://www.sau.com.au/forums/topic/387715-wtb-urgently/
Share on other sites

hey mate go see

Kolmarc

McLAIN STAINLESS

W,P: 63266177

M : 0427133036

or drop in @ 252 George Town Road, rocherlea,

i get all mine and my mates 3" from there im sure they have 4 as well i brought 3"@2m for 40 bucks 2day its just ask them how thick if your concered about the weight ..

Link to comment
https://www.sau.com.au/forums/topic/387715-wtb-urgently/#findComment-6181851
Share on other sites

Ah ok cheers mate, yeah i thought of those places, was gonna try them next, i get all my pipe from Atlas via work really cheap but can only by pipe in 6m lengths, i found an old HKS exhaust off my other 32 with about 1m of 4" stainless on the tip of it so i should be right to use that :)

Link to comment
https://www.sau.com.au/forums/topic/387715-wtb-urgently/#findComment-6182306
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
×
×
  • Create New...