Jump to content
SAU Community

Gtr R34 Brembo Brakes And Other Parts V Spec For Sale

SkylineSky
 Share

Recommended Posts

SkylineSky Rising Star

SkylineSky

Posted
Posted

Hello fellow SAU members as the post says I have for sale the following parts of my GTR R34 V Spec. Will go halves in freight cost as they are only sitting in the workshop.

Dont waste yours and my time by offering low ball money.. these are prices to sell..

1.... Brembo Brakes front rotors and complete rear brakes, rears are 322mm rotors as per late model V spec complete with brake lines, 2 sets pads, brembo calipers rotors are perfect condition.

" I dont have the front Calipers they have been sold" but the front rotors are there in perfect condition.

Price is $1600 for the lot......... these will bolt onto any model GTR

2.... Blitz Nur spec 3 " stainless exhaust system for GTR R34 from the dump pipe back.. slight scratch on the bottom side and a small dent otherwise very good condition.. $400 ( in Brisbane )

3.... Seimens 880cc 11mm injectors, perfect condition and will supply flow chart if needed just been serviced 2000 klms old... $400 ( in Brisbane)

4... 1000 HP ATI harmonic balancer for GTR R34 RB26 with undersize pulley for water pump, it has been drilled by engine builder for balance been checked and the balance is perfect. $250

Call Dave 0412950192

post-68282-0-02099500-1326319578_thumb.jpg

post-68282-0-59971300-1326319679_thumb.jpg

SkylineSky Rising Star

SkylineSky

Posted
  • Author
Posted

Hello fellow SAU members as the post says I have for sale the following parts of my GTR R34 V Spec. Will go halves in freight cost as they are only sitting in the workshop.

Dont waste yours and my time by offering low ball money.. these are prices to sell..

1.... Brembo Brakes front rotors and complete rear brakes, rears are 322mm rotors as per late model V spec complete with brake lines, 2 sets pads, brembo calipers rotors are perfect condition.

" I dont have the front Calipers they have been sold" but the front rotors are there in perfect condition.

Price is $1600 for the lot......... these will bolt onto any model GTR

2.... Blitz Nur spec 3 " stainless exhaust system for GTR R34 from the dump pipe back.. slight scratch on the bottom side and a small dent otherwise very good condition.. $400 ( in Brisbane )

3.... Seimens 880cc 11mm injectors, perfect condition and will supply flow chart if needed just been serviced 2000 klms old... $400 ( in Brisbane)

4... 1000 HP ATI harmonic balancer for GTR R34 RB26 with undersize pulley for water pump, it has been drilled by engine builder for balance been checked and the balance is perfect. $250

Call Dave 0412950192

post-68282-0-02099500-1326319578_thumb.jpg

post-68282-0-59971300-1326319679_thumb.jpg

Bumpity... Bump

  • 2 weeks later...
SkylineSky Rising Star

SkylineSky

Posted
  • Author
Posted

Hello fellow SAU members as the post says I have for sale the following parts of my GTR R34 V Spec. Will go halves in freight cost as they are only sitting in the workshop.

Dont waste yours and my time by offering low ball money.. these are prices to sell..

1.... GTR R34 Brembo Brakes front rotors and complete rear brakes with rotors, rears are 322mm rotors as per late model V spec complete with brake lines, 2 sets pads, brembo calipers the rotors are perfect condition.

" I dont have the front Calipers they have been sold" but the front rotors are in perfect condition.

Price is $1600 for the lot......... these will bolt onto any model GTR

2.... Blitz Nur spec 3 " stainless exhaust system for GTR R34 from the dump pipe back.. slight scratch on the bottom side and a small dent otherwise very good condition.. $400 ( in Brisbane )

3.... Seimens 880cc 11mm injectors, perfect condition and will supply flow chart if needed just been serviced 2000 klms old... $400 ( in Brisbane)

Call Dave 0412950192

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • oHBoy.
      Starter motor replacment teeth count.

      By oHBoy. · Posted

      Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • niZmO_Man
      J50 clock date suddenly reset to January 1

      By niZmO_Man · Posted

      Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • niZmO_Man
      Wheel Sizes & Offsets For Skylines

      By niZmO_Man · Posted

      8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...