Jump to content
SAU Community

Recommended Posts

Guest Robo's

Before you guys going ranting and raving about shootmode mode, i just done a quick search and most guys cars on this forum are dynoed in shootout mode.

http://www.skylinesaustralia.com/forums/at...achmentid=13796

http://www.skylinesaustralia.com/forums/at...achmentid=10705

http://www.skylinesaustralia.com/forums/at...achmentid=12831

Heres a couple of links to dyno graphs and you will notice these are done in shootout mode too. I think most tuners use shootout mode these days to stop manipulating figures.

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Hi guys, this Dyno Dynamics (DD) Shoot Out Mode (SOM) discussions needs a few facts;

When we put our DD into SOM it automatically corrects for certain things, I will use one as an example, ambient temperature. As you all know ambient temperature affects how much power the car makes, when it is hot the power is down, when it is cold the power is up. DD decided that say 25 degrees was a good all round "normal" temperature. So if the temperature on the day that your car is being dynoed is lower than 25 degrees, then the DD software reduces the power output on the dyno graph. If the temperature is higher than 25 degrees, it increases the power on the dyno graph.

The same applies to humidity and air pressure. So you cannot say that SOM always increases the power graphed, what it does is it "normalises" the results. That way a DD in Tasmania during winter in SOM will show the same power as a DD in Cairns in summer in SOM. This "normalising" is exactly what Nissan and all the other car manufacturers do when they quote a power output for their engines. In fact the din standard used internationally requires this.

The big advantage of SOM, is that all the settings are shown on the bottom of the printout so you can tell if any "cheating" is going on. This removes about 85% of the possible ways an unscrupulous dyno operator can get "cheater" results.

Hope that adds to the thread.

Thanks sydneykid. Inasnt, that refers to people being just plain unscrupulous! You may as well stand on the load sensor and say that that's a way to fudge figures. It's obvious and not worth mentioning and doesn't aid the discussion.

All anyone needs to remember is that chassis dyno's are tuning tools. The end.

Adrian

Where are you from mate i'm from frankston and i didn't know there was a dyno in carrum downs? how much does it cost to use? Also have you upgraded ur fuel sys? What boost controller u using? I want a similar result but i will put steel wheels in there, don't trust the ceramic.

Hi guys, this Dyno Dynamics (DD) Shoot Out Mode (SOM) discussions needs a few facts;

When we put our DD into SOM it automatically corrects for certain things, I will use one as an example, ambient temperature.  As you all know ambient temperature affects how much power the car makes, when it is hot the power is down, when it is cold the power is up.   DD decided that say 25 degrees was a good all round "normal" temperature.  So if the temperature on the day that your car is being dynoed is lower than 25 degrees, then the DD software reduces the power output on the dyno graph.  If the temperature is higher than 25 degrees, it increases the power on the dyno graph.

The same applies to humidity and air pressure.  So you cannot say that SOM always increases the power graphed, what it does is it "normalises" the results.  That way a DD in Tasmania during winter in SOM will show the same power as a DD in Cairns in summer in SOM.  This "normalising" is exactly what Nissan and all the other car manufacturers do when they quote a power output for their engines.  In fact the din standard used internationally requires this.

The big advantage of SOM, is that all the settings are shown on the bottom of the printout so you can tell if any "cheating" is going on.  This removes about 85% of the possible ways an unscrupulous dyno operator can get "cheater" results.

Hope that adds to the thread.

You forgot to mention the Intake air probe, this is what can make 20-30 RWKW's difference very easy.

The higher the IT number on your Shootout Graph, the more correction has been applied.

If you want an honest reading, tell the DD owner to leave the yellow Intake probe lead at the dyno cabinet, here it will read Ambient temp, and you are gauranteed a non overly corrected reading.

great result!

ahh the old stock turbo debate.

my thoughts are it depends a lot on your cooler. Consider a stock cooler, running 12psi. Tests have confirmed that to get 12psi manifold pressure, the pre-cooler pressure has been over 20psi. So really you are pushing your turbo harder than you think.

Now drop in an efficient front mount that say for eg has no pressure drop. your turbo is working much less to get the same 12psi at the manifold now.

i ran my car at 13psi with the stock cooler for 6months (hard driven!) then ran it at 12psi with a good cooler and ecu making 200rwkw, and never had a problem. I have mates running 1bar with the stock turbo and good FMICs with no problems. Im not saying they wont go, but ive seen many of them pushed very hard and survive. Obviously depends on the turbo's life in japan.

NB, im talking about series one turbos, havent had experience with sII's.

Sorry to get off track of your results, but bottom line i think is that turbo not working as hard as some think with a good cooler :) I am wondering what sydneykid thinks about this just out of curiosity.

Robo, that result looks impressive. I've got a few questions for ya; What dimensions is the coola? Is it more laggy? Do you think it'll be enough to shave 0.33sec off your current ET ;) ?

My input on dyno issue:

All anyone needs to remember is that chassis dyno's are tuning tools.  The end.

:werd:

My input on the stock turbo issue:

The point is, there is NO hard and fast rule regarding when a std ceramic wheel turbo will fail. Just guidelines.

:werd: Great minds think alike :( For the record I have run 13psi for more than 6 months and have never had a problem.

Guest Robo's
Robo, that result looks impressive. I've got a few questions for ya; What dimensions is the coola? Is it more laggy? Do you think it'll be enough to shave 0.33sec off your current ET ;) ?

My input on dyno issue:

:werd:

My input on the stock turbo issue:

:werd: Great minds think alike :( For the record I have run 13psi for more than 6 months and have never had a problem.

Rigga.

The intercooler is the same as the Hybrid one, 600*300*75, but just with better piping. I got it from the INTERCOOLERGUY. I cannot notice any difference in lag. Without adjusting the bleed valve, i noticed about 0.5psi increase. Also noticed from the dyno sheets, it was keeping boost better up high. Im still loosing about 1.5psi from midrange to top end, where as the stock one i was loosing say 2psi, so a small saving there.

If i can get the same 60', a 12 is on the cards!!

All in all, i dont care if the dyno figure is sceptical, i still gained 28rwkw from a FMIC and exhaust cam gear. Thats what im happy about and i can feel the difference.

Guest Robo's

The 215rwkw chart doesnt look too good midrange, slight dip, looks like it had a miss, hence the air/fuel ratio spike. The red line is one of the dynos previously done with the old set-up, only about 170rwkw.

The 209rwkw is nice, but done in 3rd gear, hence the lower figure because of the dog leg in gearbox.

Notice the size difference between the stock cooler and the new one. HUGE :(

You forgot to mention the Intake air probe, this is what can make 20-30 RWKW's difference very easy.

Yep, that's why I said "85% of the possible ways of cheating". There is still 15% left and IT is surely one of them. But at least I can read it on the bottom of the print out, so I can't stop the "cheating" but I sure know about it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...