Jump to content
SAU Community

Recommended Posts

Hey, i'm after an off the shelf (aka autobarn / supercheap etc) polish / pads to use to try and get some of the swirls out of the paint on my project. Budget is small (aka the less i spend the better) and im not after a perfect showroom finish. My housemate has one of those cheap supercheap buffers and already have some mothers quick detailer / clay bar and a wax. Just after advice on a polish and pad to use and any tips to get the best out of the average buffer. Really not interested in spending heaps, and i understand you get what you pay for but car will mostly be a track / weekender and already has chips etc so doesnt need to be perfect. Any help would be awesome.

Cheers, Jason

Edited by Jasonr31
Link to comment
https://www.sau.com.au/forums/topic/388925-detailing-on-a-budget/
Share on other sites

just get yourself some light cutting compound.. i got one here Mequirs Mirror glaze 2, Finecut cleaner, was only 15$ or thereabouts...

If you look on the bottles they have an indicator showing how heavy they cut on a scale of 1 to 10..its about 5...have a go with something like that and if it doesnt work maybe try something a little stronger..then work your way down to a light cut and then a sealant/wax..

Probably best to have a seperate pad for each but if you really wanna cheap out just wash the pad in hot water, it will be dry enough in the sun in about 15 minutes .

I would use a fresh pad then for your wax though.. :thumbsup:

Jason,

Sorry to let you down mate, but you really wont be able to perform any paint correct with that type of polisher.

IF you are on a budget, get a Random Orbital Sander with a 150mm plate from bunnings. Although this will not have the power of the Concours 900w Random Orbital Polisher (@$229) we sell, you could get one or two pads for $20 each and a I step product for $30.

IF you would like any advice let me know.

Im guessing this will not be the only car you ever polish, and I hate to see you waste money on something that wont do the job for you.. IF the budget is really tight, find a few mates and go in together. Otherwise once they see your car you will have to do it.

if you're on a tight budget i reckon just use your hands? a foam pad will be like ... 5 bucks for 2 or less for the meguiars ones? - they arent much more than the SCA one so dont stinge out, may as well get the megs ones!

use that, a good microfibre cloth .. and i really liked autoglym paint renovator when i first got my skyline. and follow it up with a better wax like meguiars tech wax .. or find something like naviwax which has some filling properties .. not the best solution but on a tight budget its probably a better solution than getting a machine and pads etc.

probably a better idea than using a supercheap buffer :\

or perhaps borrow/loan somebodys if you know anyone near you who has one

all the best mate :)

Jason,

Sorry to let you down mate, but you really wont be able to perform any paint correct with that type of polisher.

IF you are on a budget, get a Random Orbital Sander with a 150mm plate from bunnings. Although this will not have the power of the Concours 900w Random Orbital Polisher (@$229) we sell, you could get one or two pads for $20 each and a I step product for $30.

IF you would like any advice let me know.

Im guessing this will not be the only car you ever polish, and I hate to see you waste money on something that wont do the job for you.. IF the budget is really tight, find a few mates and go in together. Otherwise once they see your car you will have to do it.

I tried one of those $40 polishers from supercheap at my mates house one day and they have absolutely zero abilities to correct paint.

And I agree with Ant. If you don't have the funds to buy a decent machine, try and get a group of ppl to chip in and just share the usage.

Edited by JDM Performance

Forgot about this, went and got some cheap kitten polish and had a go with the super cheap buffer, seemed to get a few scratches out but not all (not deep ones either) and it seemed to make the paint dull in one small area? (guessing that may have been my technique or lack of.... its not bad can only just notice in the sun) but im guessing everyone is right when saying cheaping out generally wont work. The paint isnt all that bad anyway i might have another go but by hand next time and see if i can make any improvements... cheers everyone!

Forgot about this, went and got some cheap kitten polish and had a go with the super cheap buffer, seemed to get a few scratches out but not all (not deep ones either) and it seemed to make the paint dull in one small area? (guessing that may have been my technique or lack of.... its not bad can only just notice in the sun) but im guessing everyone is right when saying cheaping out generally wont work. The paint isnt all that bad anyway i might have another go but by hand next time and see if i can make any improvements... cheers everyone!

Forgot about this, went and got some cheap kitten polish and had a go with the super cheap buffer, seemed to get a few scratches out but not all (not deep ones either) and it seemed to make the paint dull in one small area? (guessing that may have been my technique or lack of.... its not bad can only just notice in the sun) but im guessing everyone is right when saying cheaping out generally wont work. The paint isnt all that bad anyway i might have another go but by hand next time and see if i can make any improvements... cheers everyone!

  • 5 months later...

Jason,

Sorry to let you down mate, but you really wont be able to perform any paint correct with that type of polisher.

IF you are on a budget, get a Random Orbital Sander with a 150mm plate from bunnings. Although this will not have the power of the Concours 900w Random Orbital Polisher (@$229) we sell, you could get one or two pads for $20 each and a I step product for $30.

IF you would like any advice let me know.

Im guessing this will not be the only car you ever polish, and I hate to see you waste money on something that wont do the job for you.. IF the budget is really tight, find a few mates and go in together. Otherwise once they see your car you will have to do it.

QFT

I bought one of the Concours polishers and wouldn't use anything else

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...